HOW TO INSTALL APEXSTONE GAS STRUTS?1.Determine the center position of the rectangle mounting hardware ,it should be 60 mm/2 3/8 inches from the back of the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box/kitchen cabinets,then mark A ,drill 2 holes on the sides of the center point A.2.Determine the center position of the round mounting hardware, it should be 170 mm/6 11/16 inch from the back of the cabinet, and 10 mm/2/5 inch from the top of the cabinet ,then mark B ,drill 3 holes around the center point B.3.Fix the connectors, connect the joints and the strut.Package Includes2 x 100N/22.5lb Gas Strut2 x 150N/33.8lb Gas Strut2 x 200N/45lb Gas Strut6 x Set of Screws
G**G
Brackets are not fit for purpose.
Gas struts them selves a fine, the three bolt circular brackets are fine, however the two bolt brackets all bent immediately the first time the lid was closed, despite spending an hour checking they were perfectly in line and the struts did not bottom out on closure.They can not even take the force of the 100N struts, there is not way they would work with the others.Also as a side note the instructions in the pictures and those printed on the package have different values and are no use for anything. however there is plenty of info available with a quick google search.
D**
Pure junk. Don't waste your time or money.
Utter garbage. Much sturdier ones available on eBay at same price. And various online retailers. Don't buy these
K**C
Do what they are made for.
Seem very sturdy, do the job well. Make sure you fit them properly, which is not difficult, re a couple of other reviews.
Trustpilot
1 day ago
2 weeks ago