OnlineMetals 6063 Aluminum U-Channel, Unpolished (Mill) Finish, Extruded, T52 Temper, AMS QQ-A-200/9/ASTM B221, Equal Leg Length, Squared Corners, 2" Base Width, 0.125" Wall Thickness, 12" Length

Just what I needed to manufacture a shroud around my oil cooler and fan set up for my sportster. It may not look completely professional, with molded curves, etc. but it will look good enough, and will be sturdy and well built, and will work better than any kit I've seen out there for mucho more dinero. If you're considering doing something like that, a B7B tru cool oil cooler, and the Protechnic Fans, 12 V, 92 x 92 x 32mm, 4800 RPM MGA9212XB-032 IP68 high output fans (water and dust proof) sold here on Amazon fit between the rails of this like a glove and with two of them will move approximately 180+ cfm of air through the cooler at stop lights on hot days. Recommend the derale inline temperature fan switch, sold here, as well. Plan on hanging it from the bottom front of frame, from the bolts used for my engine guard, but might side mount it out there toward the side of engine guard itself, with a couple clamps, will see.

I’m using it as a guide rail on top of another rail to hold up a canopy I cut it three pieces, 4 inches each. It is strong, sturdy, and fits perfectly over one by three steel bar to create a firm fit. It is exactly what I hoped it would be and that is a quality product! I may two-more, to join a couple one by ones together.

The aluminium L-profiles I orderns arrived in good condition and within a reasonable time from ordering.

Seems pretty typical. Rough mill finish, and more sizes available than I can find locally. Only problem is the product page was difficult to read, thus causing me to order the wrong size.

It's good

Just what I needed to make the fence for my router table.

Suited my need perfectly. A quick deburring of the cuts ends would have been awesome, but a file and less than 5 minutes had the perfect piece without having to buy a long piece and cut it down myself.

Nice Channel, slightly short, probably due to cutting. Fortunately it was long enough for my use in anchoring my new 50" TV to a base I made.It is VERY NICE to be able to buy a small Channel at a very reasonable price..... Thanks!