HEADLIGHTSDEPOTHalogen Headlights Compatible with 97-03 Ford Expedition F-150 F-250 Includes Left Driver and Right Passenger Side Headlamps With Corner Lights Chrome Housing

Easy fit, easy install, the halogen bulbs with the headlights are pretty dull, about the same as the originals. I replaced them with an LED bulb and they work great. Overall this is a really nice unit and makes the truck look really nice.

The product is very well packaged and was no problem to install. The only problem I had was on the signal light lens. The clip that comes with the new signal light is too small for the mounting screw. I had to take the clip off the old one and place it on the new ones. Aiming was a snap too. On the headlight lens is a + mark. Measure from this mark to the ground, then measure 25 feet distance from the headlight to a wall on level ground. At the wall measure the distance from the ground to the + mark with a piece of tape or chalk. The lights should line up to the mark on the wall when 25 feet away. Remove the light and turn the top black nut to raise or lower the beam then reinstall the light. I found that placing some lithium grease on the tracks the headlight blade slides in to be of help. Another thing that helps is to measure the nut and bolt lengths on the old lights and adjust the nuts on the new ones to be the same. This put mine right in the ball park and I didn't have to spend a lot of time aiming them. What do I think? Definately worth the money and the truck has an entirely different appearance. Very satisfied !

I purchased these new headlights with a bit of research on some new styles to put on my truck. I’m very happy with the headlights, they fit great and give the truck a nice fresh look. Would definitely recommend!

My OEM headlights were yellow and I didn't like the look anyway, so I decided to buy these. They are less expensive than some, and maybe that's the difference between a great product and a good product.Installation took about 45 minutes, with much of that time spent trying to get the corner markers in place. There were no instructions, at least none that I found, and I emptied the box, but it's pretty straightforward. Remove the screw holding the marker light in place, then the markers just slide out. Then lift the locking things for the headlights and they slide out.I adjusted them so the adjusters were in the same spot as on the OEM and then slid the headlights into place. The headlights went in great, but I think I need to lower them just a little. The markers were less cooperative. As others have found, the metal clips that the screws go into have too small of a hole, so the screw won't go in. Swap them with the ones on the OEM. The trimming done on the marker lights isn't as smooth or accurate as the OEM lights, either. So, they are a tight fit. Nobody will notice that the edge is scalloped unless they are really looking closely. The driver side looks good, but the gap isn't quite the same at the bottom inner corner. It's the same as the passenger side, so it doesn't look too odd. The gap between the marker light and headlight on the passenger side isn't even, though. It's not horrible, but it's not quite right either. This is one area where I suppose a more expensive aftermarket light might be better.The light is not as spread out as the originals probably are. I don't really have a great reference since mine were so dim from yellowing that just about anything would have been better. Still it seems pretty bright. I've posted pics of the light pattern which seems a little strange. It'd be interesting to see how they look compared to another brand.

This product is for my pick up truck

I own a 1997 Ford F-150 Lariat. This truck has all original parts, including engine at 425k miles and headlights that were in need of replacement. I was given this truck as a graduation gift and when I got it the headlights weren’t exactly a high priority for fixing up this antique until someone decided to crash into my turning lamp cover snapping it off. I found these online and decided to give them a try. I noticed that they are a better material than the original factory headlight and turn signal assemblies. Although both are plastic these are a harder plastic and polished to look good. I absolutely love the look of them and would recommend them to anyone who needs a new set.I did have one problem during installation. The clips that hold the bolt in place that come with the new turn signals are too small so I just pried the other clips off the old ones and put them on the new ones and good to go.I hope this was helpful!

The lights work great but are hard to install. They don't fit perfect in the grill and are a bear to install.

nice clear lens my old headlines r 27 years old