Master AirbrushGravity Feed Airbrush Mini Sandblaster Kit - 1/2 oz. Cup, 0.5 mm Tip, Hose – Portable Airbrush, Ideal for Art, Miniature Painting, Model Cars, Nail Art, Etching Glass & Rust Removal

Works perfect for small detailed areas easy to clean great case for storage

This little sandblasting airbrush works! I had some rust spots/rock chips on a hood that I was going to repaint, but I wanted to remove all the rust at the bottom of the paint chips first. I combined this with #12 glass beads for a blasting medium, and the results were amazing! The rust blasted right off, and the surrounding paint stayed intact. Just a few seconds of blasting per spot removed all the rust. Better than even my optimism was expecting. The only caveat about this airbrush is the air line connector fitting threads. They are 1/8" British standard pipe thread(BSP). You'll need an adapter to join it with NPT connectors that are the standard in the US. I got a set of 2 here of Amazon for 8$. HongBoW Hardware 1/8 BSPT Male x 1/4 NPT Female Brass pipe fitting adapter.

She works like a breeze. My only complaint is hopper size. I have to fill it at least three times to sand blast a 4/4 inch area and I usually have 2 dozen of those to work on at a time.

I designed a printed circuit board for my job. An oversight caused the board to have solder mask over parts of the circuit where components were soldered. This made the board useless. Some research on the Internet led me to find an Air Eraser, and I picked this particular one at random.I used cheap baking soda from a grocery store, and ran the air pressure at 85 psi. It did a great job, and was very precise. The only issue I had was finding adapter fittings for connecting to a shop compressor. I had to order those online.

The product is a good design and useful for ultra light duty etching. This is not a high performance cleaning or material removal tool. It's a glass etcher and can only effectively use very fine grit material. Unfortunately, mine was freght damaged. The material container was snapped off. Instead of jumping threw the return/refund hoops, I epoxied it back together cause I needed it pronto. It works great and the joint I repaired is now stronger than before.

LOVE this!! I used it for real for the first time last night and is works amazing!! very easy to use! great quality! very nice product! this was the first time that I have used an air eraser. I usually use etching cream to do glass. but this tool makes it so much easier and more controlled!! no mess and no mistakes!!

Bought this as a mini sandblaster, as it was advertised as such. First there was no adapter to connect to an air compressor. Called the manufacturer, and they offered no help, so had to travel to a few hardware stores to find something suitable.Once hooked up, it ran for a half hour, then wouldn't stop the air flow with the push button on top. The spring pin inside was sticking, so all the included oxide compound flew out as soon as air was attached. To make matters worse, the tip also continued to clog, so spent most of the next hour having to take apart and try and blow out the tip with a separate air gun. After this, it just completely stopped operating at all.I enjoy using Amazon for many products, but this is one I wish now I would've avoided all together. Just a complete fiasco. Beware to anyone else considering this.

Should be used with low humidity to keep from clogging. and it helps to dry your sand or whatever you use before you put in this sandblaster. Place on a cookie sheet and bake at 250 for five minutes to dry your sand. if you do this each time you will have less clogging. I like this thing a lot. Helps with them little mistakes, or little jobs.

The media could not be loaded.  Muy buena herramienta, excelente calidad de materiales, incluye una muestra de abrasivo, en el vídeo lo use con bicarbonato común y me dio excelentes resultados, con el óxido de aluminio es más poderosa, lo único malo y si es un punto a considerar es que, al menos el mío, llegó sin manual de operación, y aunque su uso es bastante sencillo, si se es novato con aerografos puede ser complicado. No le doy las 5 por esto del manual, por lo demás, excelente

Works well to remove paint from many items

It seems to clog up with the product that came with it. Shaking the actual gun while using it sometimes helps the particles go through such small holes. But overall if you're modified it's just a fraction bigger for the holes the particles would fit easier. But the gun itself is easy to use and good quality. I would definitely buy off this seller again.

great

Great for small projects.