Sellstrom Face Shield, Single Crown, Full Safety Mask for Men and Women, Pin Lock Suspension Headgear with Clear Polycarbonate, Scratch Resistant Window, ANSI Z87, Blue, S390010

Firstly, face shields are better than cloth masks, but shields were reserved for First Responders PPE and rightly so. A couple of weeks ago I saw that the general public could now purchase Selstrom's face protection. It is a good product - if you put it together correctly. The plastic shield has a protective bluish covering you have to remove but it's hard to get started. I started at the attaching holes and finally got it removed. The shield attaches easily - if you start with the correct end. Start with the largest slot first - after you've slid the end under the blue headpiece. The holes diminish in size as you work around the front of the headgear. Then slide the final end under the blue headpiece and you're done. It is lightweight, comfortable, not as constraining as a mask, but in some situations use both. The only negative is that Selstrom does not include instructions to assemble. It took me a while to figure out, but once I did it was easy to assemble and works great. Stay safe people. EDIT: Looks like pictures did not stay in the order I uploaded them. I don't think I can change the order so I hope you can figure the sequence yourself.

These have clear lenses that are very lightweight. The hood secures and the strap tightens and holds well.

Works pretty well and adjustment is decent, but not perfect. Good 5 IR shielding for acetylene welding (NOT electric welding) that has resisted marring and scratching, probably since I store it in a soft motorcycle helmet bag. The tightening nut in the back tends to come loose after about 15-20 minutes, which can be a bit annoying, but not terribly so -- you just have to check it periodically. At this price point, you cannot expect perfection, but this is a competent workhorse for what it is.

The shield is great to use. Rachet works good. Sure beats wearing goggles. Packed well.

This product is easy to put together and adjustable but the face shield is very thin and flimsy. I purchased this item for safety while grinding locks off auctions units but im scared to try it out because of the thinness of the glass.

I wrote about this product a few weeks ago. I love this face shield. I work in the medical arena and need one now. It was easy to put together. There's directions on the product website. Follow them exactly and you'll get the shield holes to align with the helmet part. The first 2 days of wearing it my neck muscles kind of ached at the end of the day because I was not used to wearing anything on my head. It's fine now and my neck muscles have probably gotten stronger. The shield is easy to clean with alcohol wipes and even though there is a little glare it is very tolerable. The shield also can flip up so you can get it off your face to get a drink of water or sip of coffee, and still keep the device on your head. I have dropped it by accident a few times. It has not broken or cracked, so I'd say it's durable. A co-worker placed my name on the top using her label maker to personalize it for me. A lot of other co-workers have now purchased this same shield. I recommend.

Works great for keeping eyes safe while grinding metal, could use a more comfortable head band.. doubles as protection from flying objects when "just calm down" gets used the wrong time of month with the wife 😆😆

You will need to wear a hat under the shield otherwise it hurts when wearing the shield.The shield comes with a blue plastic film to protect the shield from getting scratched. This will help to protect you from the virus. Especially when so many people refuse to wear a mask. You can add additional protection by covering the areas where the virus can come in around your shield/mask as seen in some hospitals.It is important to note that the shield itself does not protect you from getting the virus it only keeps you from spreading it if you have the virus. To effectively protect you from the virus everyone else has to be wearing a mask as well.The shield will help protect your eyes and from any water droplets that hit your shield. It also reminds you not to touch your face and thus contaminate your mask.People that refuse to wear a mask are dangerous to be around as they can be asymptomatic and can be spreading the virus unknowingly. Keeping 6-feet is not enough because of the water droplets that can linger in the air up to 3 or more hours.Face masks help to reduce the number of water droplets that linger in the air and it is unknown as to the number of water droplets you can inhale before you sick from Covid-19.

Excelente calidad-precio

I use this protect when i use my gas trimmer. This shield is way better than using protective glasses and I found glass fog up. The face shield works great.

Exactly what I had hoped they would be. Shipping was very fast.

The product is excellent. It's fairly light-weight, comfortable and easy to see out of. The face shield is large, so I feel well protected behind it. Overall, I'm very happy with it.However, it really, really needs assembly instructions. First, the shield is hard to put on the headpiece. What you need to do is move from the longer holes in the shield toward the smaller one, sliding each in turn so that the next hole lines up. I noticed a lot of people saying that the holes don't line up. They don't. You need to make them line up by putting the holes on the tabs one at a time.Also, the shield has a thin, translucent blue plastic film that needs to be removed. It's not at all obvious how to take it off, so you need to pick at the film at the corner. When it first arrived, I thought it was just low quality, but there's actually a piece of plastic film stuck to it.Boy, does this product need instructions. I noticed several people saying they were going to return it because of the above problems. Once assembled though, it is excellent.

As far as face shields go this is a really good one. Two thumbs up.