VEVOR 31'' x 23'' Welding Bench Table Steel Welding Table Casters, Retractable Guide Rails, Eccentric Leveling Foot Nine 1.1 in. / 28mm Slots Welding Bench Adjustable Angle & Height Portable Table

The table is just what I need. Good and strong and I can move it with ease. However it was very hard to put it together..

I love the adjustability of this table. I can set the height so that I can weld in a relaxed position. I have not found any other table that adjusts as high as this one. I love that this folds and can be put away.I would give this table five stars if it came assembled. The instructions don't make several details clear (e.g., which fasteners need to go where and the orientation of some of the pieces). It's silly that the instructions consist of just one page with four diagrams. The good news is that with the instructions and the pictures on this product page, it's not hard to determine how to assemble the table. It's crazy that they didn't just take a small amount of time and provide better instructions for an excellent table.One other small nit pick is that a few of wing nuts used to fix the guide rails would not thread correctly. I think the mating nuts that were attached to the table top had a problem.

The table is a fairly nice one. The assembly was great, minimal amount of tools needed. Only real complaints that I have are the instructions could of mentioned the tools needed to put it together and a different type of handle on the table top. One good point that I want to mention is the manufacturer gives extra nuts, bolts, washers and other pieces. I haven't used the table yet but once I do I will update this post. Now for the bad, shipping! I'm not sure why it was delayed for as long as it was, and when I contacted Amazon, Vevor and the carrier not one of them could answer one simple question (What is the shipping point of origin? ) Simple but no answer. I guess they were still in the process of mining the ore, 3 weeks of waiting. Would I recommend this item?... If you want a small inexpensive welding table, yes I do recommend this table.

Received the welding table, in it's small box. Was immediately concerned about the guage thickness of the top, being very thin. Watch yourself on the corners of pieces, the metal is not deburred very well. The "clamping slots" are there , I believe, more for table Ridgidty than clamping, as the opening flanges prevent even cee clamps from a flush bite on the underside. By far the most troubling issue I'm having is the "pivot" points for the table top, do not hold the top at 90 degrees with any rigidity. The small wing nuts for the pivot are not up to the job, and the design, has no backup to help. The table top often tilts towards you if more weight is put on it off of being right in the table center. Working off an edge can be a challenge. I will have to fabricate a set of stiffeners that connect the outer table edge to the lower legs, to make the top stable enough to use without movement. I'm sure for very light welding , by that I mean light parts, nothing heavy, this is okay. I bought this to stop crawling around on the floor clamping up smaller projects, so I could achieve better welds.Hopefully I can do some mods and make this light table work for what I need. For portability sake, this is okay, but even when folded the table is 10 or so inches thick, and has a lot of looseness ,so be careful moving or folding it, lots of pinch points and sharp edges, wear gloves !

As others mentioned, I received incomplete instructions. Only a single page starting at step 4. 1000 nuts and bolts were rolling around loose in the box. Other parts were laying loose inside with no packing. I emailed the manufacturer to ask for assembly instructions. I received a sales brochure all in Chinese. So I emailed them back requesting assembly instructions in English. Their response was " We are the manufacturer, not technicians. Wait 2 days and email us again". Totally useless. I'm fairly mechanically inclined so I was able to assemble it from the photos. As I was assembling it I found the holes were not drilled so they line up properly. Expanding the holes were required to get the bolts to pass through In the end, I was able to assemble it but it's not easy and poorly constructed.

Welding table is definitely heavy duty and sturdy as can be and well made. Only problem I had putting it together is it was missing a couple bolts and nuts and washers other than that I’m extremely happy with my purchase. Definitely will get a lot of use out of this table welding a lot of stuff that I need to get done….. P.S. instructions weren’t that hard to follow it was actually pretty self explanatory with nothing but diagrams to go buy even a two year old could do it! Thanks Vevor for a great welding/fabricating table!!

I was determined to get into welding for as cheaply as possible. My whole setup is less than $200, all from amazon. Tried to get away without a table and it was just too much, splatter burns on worktable, bending over to weld. The work surface was much thinner than i expected, i place a plate b/w my weld object and the table. The wing nuts are kinda a pain, hand tight is not enough to make it stable, but when you lock it all down with pliers its pretty sturdy. Overall very happy, mainly with price, $65.

For the money and what it's for, it's worth the little extra work and cost. Instructions are small, but clear enough. There were 3 missing wing bolts for one of the rails (9 needed)... M8-1.25 thread... I used cap screws with washers ($2.00 at Lowe's). Also, the adjusting bolts are replaced with wing bolts, so you can't get enough torque to tighten with just your fingers, so I replaced with M8-1.25 40mm cap screws (another $2.00 at Lowe's). Using a spare Allen wrench for the cap screws gives enough torque to do the job. Table is sturdy enough, but I used the replaced wing bolts on the adjustable height posts, but you can also use wedges to tighten things up.

Very easy to put together. Very stody well made.

Eventually got it set up but it was not straight so needed some finagaling to get the pins to line up for the height adj.

Pensavo fosse la solita cineasta visto il prezzo, ma mi sono piacevolmente ricreduto. Certo qualche foto è spostato di qualche millimetro, ma vi si può porre rimedio senza fatica.Una volta montato risulta molto stabile e sicuro.Best buy

Also bei dem Produkt sind nicht wie abgebildet Sternkopfschrauben und ein Befestigungsgriff als Halterung dabei sondern nur mikrige Flügelmuttern => Daher der Abzug der SterneWas mich auch stört sind die extremen scharfen Kanten.Weiters ist ein Fehler in der Aufbauanleitung die 2 Vertikalen Bleche(Führungsbleche) müssen innen zu den Winkeln beim Tisch angeschraubt werden (nicht Außen) sonst ist alles zu klein (um ca 5mm) und schief zusammengeschraubt .Man kann darauf schweißen aber ich empfehle dringend die Flügelschrauben auszutauschen damit der Tisch ordentlich fixiert werden kann...Ps bei mir war das Sackerl mit den Schrauben gerissen und alles lag im Paket verstreut .Paket war auch offen und eine Schraube hat gefehlt (Senkkopfschraube zum Befestigen des Tisches)=> DoofMfg Christian

Parfait pour mon utilisation. Merci tip top