TendaAX3000 Mesh WiFi 6 System Nova MX12-7000 sq.ft WiFi Coverage - - 1.7 GHz Quad-Core CPU - Dual-Band Mesh Network for 160+ Devices - 3 Gigabit Ports per Unit - 3-Pack

We have a long single story house. I set up one of these units in the center, and the other two near the far ends of the house, each 25 to 30 feet from the first. Worst case scenario, signal travels 25 feet through 3 walls. I didn't really bother planning where to place the units. I just put them where it was convenient.I'd have to say I'm really impressed. This is the first mesh system I've owned, so I don't have any other perspective. But, the whole house gets great coverage. Our 1/3 acre yard gets good coverage as well, all the way out to the property line.We get 500MB Internet wired to the main computer. And at the worst place in the house, I see 380MB. I think that's reasonable. None of our devices are latest generation. On average, our devices would be maybe 3 or 4 years old. So, that's 30% speed loss inside the house. I use the wireless backhaul, so I would likely get better speeds if I used a wired solution instead.It was really easy to set up. The app is not very polished or slick, but it does the job. I turn the kids wireless off and on by a schedule in the app.I've used it about a week. Long term reliability can't be judged in that time. But I hope the performance I've seen so far will hold for a long time.Pleased customer.

This mesh router system is the BEST!!! I have the Gig speed, and signal strength is awesome over my home and the back yard. Setup was easy if you read the directions. You need your cell phone to download the Tenda app. Speed has increased 3x what it was with my TP-Link mesh setup around my 3100 sq home. I thought that the 7000sq ft coverage would be great and it is! This design is very sleek and modern looking. Get it! Great price!

I bought this because my isp issued router was struggling to keep up with all my smart devices. It kept dropping a few randomly. I installed 1 of the 3 tienda devices and it connected to all my devices, even the ones my last router wasnt reaching. It has no problem handling multiple video streaming users. I havent been using the other 2 devices to date because just 1 device is meeting my needs. Something i dont like is when there is an internet outage due to my isp, the router doesnt allow lan communication amoung my smart devices. I'm not sure if its a setting i have off or if its my smart devices. I did not go through all the features but there are quite a few.

it's a shame because wireless range and quality is really good and the interface isn't bad, however I'm not sure if it's bad hardware or bad firmware but these things are ridiculously and infuriatingly unreliable. it's not bad with a capital B, it's bad with a capital BAD.first, I have one unit that just randomly decides to disconnect itself from the network for no particular reason. literally. it's in my office room connected to nothing but my nas that sits idle 99% of the time as well as my office desktop and network printer which both are off 99% of the time. periodically I'll try to access the nas or Windows will give me an alert for file history being disconnected too long and I'll open the router portal and that unit will be grayed out on the tree. sure enough go into the office and the light is blinking green. power cycling the unit fixes it but this happens SEVERAL TIMES EVERY SINGLE DAY.second, the 2 secondary units will just crash or something when faced with too much traffic. how much is too much? a single 1080p youtube video apparently, in some cases. ill be watching a video, then suddenly the wifi will drop out, i look over and the unit is blinking red. after a bit it will reset itself and reconnect, but this is still 2-3 minutes after failure so its not a short quick interruption. same for the other one, i tried to hook up and run a pihole (network wide adblocker) just to try it out and that unit would CONSTANTLY crash 2-3 times AN HOUR due to the entire network having to be routed through that unit to go through the raspberry pi.finally, the primary unit will also itself just randomly decide "im out" and do the blinking red light. this kills the entire network for the house because even if the other 2 units (by some miracle) are fully functional at the time because nothing can connect to the local network anyway. this is the rarest issue of the 3, but still shouldnt happen in the first place.note that this is with an entirely ethernet backhauled setup too, no wireless to wireless bridging, which makes this all the more damning.before i bought the mx12 ive been running a mishmash of a couple entirely different routers (a dlink and 2 tplinks) that all just said the same SSID and password and disabling dhcp on all but one of them, effectively meshing them. i ran that setup for over 5 years, and it worked perfectly. seriously, i had probably 95-98% uptime that entire time, there were almost no problems ever. even going room to room the handoff between routers was seamless. i only upgraded because i wanted wifi6 and i didnt want to spend 300-400 bucks on multiple mid tier routers. clearly i should have.

I've been trying to get internet to my metal shop (about 50 feet from my house). This did it! I put one where the modem/fiber comes in and one in a window of both buildings. Now the shop has excellent internet speeds.Even the Tenda app is easy to use and works great. You can see the status of each unit and the devices connected to them.Super happy with it!UPDATE: after a year or so, still very happy with this setup. Would recommend!

When working it is really fast, bought a pack of three, did my second update the signal wasn't that good for one of them and it brick.So now I have two, support kept telling me to use the application to update it and didn't understand when it breaks it doesn't do anything they were playing games...For the price it's a good product, but the configuration is lacking inaccurate instructions and is very vague at best, the light colors are not equal to the instruction manual, and if you tinker with it long enough you eventually figure out how to get it working.

I bought this router to pair with a modem to replace xfinitys garbage router/modem combo. I'm so glad I went with this setup because I have seen a speed increase and quadrupled my wifi coverage on my property. I did have a issue with one of the mesh satellite disconnecting but after speaking with tech support they quickly sent out a replacement. Great customer service,great router =happy customer. I highly recommend.