Vision 20W Laser Engraver, Auto-Lifting for 5.5" Material, Smart Camera for Easiest Positioning, 600mm/s Speed, Laser Engraving Machine for Tumblers Metal Wood Acrylic DIY Craft Gifts Making

I this easy to use laser, tumblers print at ease.Great design and works perfectly .

The laser is high quality. Everything worked as described and the device is of high quality.

There are some Integration Issues with LightBurn but they appear to be continuing to work on that integration. There is a thread by "workabyte" on the LightBurn forum that discusses a few of the items.Overall VERY Happy and Would Buy Again though I would likely get the 20W and save some money on it# The Bullets:- Initial setup is a breeze, 10 min hardware, 5 min software and you are ready to create something- the project used does take a long time to process but also fun to watch the image realized- Auto focus and height adjustment is AMAZING and so stress reliving.- WeCreat Software processes images REALLY well and overall, very easy to use. I do have some exposure to Sign Software, so it feels a little familiar.- Material presets are VERY easy to pick from and configure with visual examples of what to expectPROPER VENTING IS IMPORTANT!!!!I have a vent connection for my window that this was running through, but my small office space did still have a fairly strong smell, may consider the air purifier if this is consistent (I have only created one item thus far)---# Details,### Setup: 10 minsupper simple and easy to follow instructions. Nearly zero assembly, plug in air assist, plug screw on vent port and attach hose, plug in the power and you are done.### Software Setup and ProcessingInitial setup takes you through it all, I am a 100% new to laser engraving and cutting. The free software they provide has a great step by step guide and when you are done you have created something using both cuts and their amazingly simple image to engraving profile (this is going to be a lot of fun). You are also exposed to their "project store" where there is a plethora of ready to go projects that you can just load and burn.### 1st Custom Project In 30 min.I have already used this to create a wood "challenge coin" on one of the sample/test pc of wood that comes in the box. I imported an image, crated cut lines, and added text in about 15 min.The Auto Focus camera for me is a must have, this unit cost a little more than the xTool I tried out but just ease of setup and knowing exactly what the end result is going to look like is 1000% worth it. Completely removed the guess work and fear of "Fn It Up". For my challenge coin I was about to measure it and try to crate a cut circle line and then once the image loaded up all I had to do was draw the circle around it and TaDa!---### Considerations:- xTool S1 does have a method for capturing your material and importing it to your project, it requires a cell phone with the app and doesn't feel as accurate/safe even though it worked fairly well. just extra steps that I am happy to not take.- xTool S1 has a larger bed size as far as X,Y but to get comparable height you must use an additional attachment adding and removing could be a PITA if you change project types frequently.- this is a hobby item for me so I plan on just throwing in whatever feels like fun and customizing it---# More to come:I have not received the IR attachment yet, looking forward to that and will update once I have received.

If you are an every day crafter, business owner or thinking about starting a laser business?THIS IS THE MACHINE FOR YOU!The #1 thing I can say other than how amazing this laser machine is… the SUPPORT staff is top notch!Anytime I have sent a message or email I get my answer within a few hours, not days!Thank you Wecreat.I’ve been wanting to get a laser for a while now, and after researching for several months the Wecreat Vision seemed like the perfect machine to test the waters with. Shipped quickly and was well packaged. Instructions were easy to follow, and setup was a breeze (took about an hour with adding air out the wall with dryer vent!).I really enjoyed the simplicity of the setup, and ease of use. I was pleasantly surprised that it connected to WiFi flawlessly using the Wecreat/MakeIt Software (WHICH IS FREE AND HAS THOUSANDS OF PROJECTS). I can now operate it in the Shop, while designing and sending files over WiFi. Much better than cabled, and did not have any difficult configuration to do.After getting everything set up it's been super easy to use!Have been playing with it for about two weeks now, and I have to say I'm sorry i didn't get it sooner!The list of amazing features is long….Built in HD camera (not many laser machines have this)20W PowerHundreds of materials you can put in this 20W Diode Machine!The HD cameraAuto Focus feature is GREAT!1080’ Rotary Engraving for all your tumbler and glassware!Built in Air AssistNow available to use with LIGHTBURN!This is a Class 1 FDA Certified laserThe safety features are one of the main things that got my attention to this machine. Especially the automatic STOP if lid is open. (Great for inside the house if the kids are around).I can't wait to see all the new products they are making for us to add to the Wecreat Vision 20W Laser.

I wish this was a little cheaper however I bought it anyway. After doing extensive research this thing is incredible. It comes with its own software which is great for beginners. It takes a little know how in the technical aspect however follow the instructions. The design capabilities of this machine is endless. Also just as a little FYI for those of you purchasing this machine…the two pieces of wood that come with it are for calibration. Don’t make the mistake of using them for your first projects…..yes I did that. Whoops. If you buy this machine enjoy it!

Was considering an expensive laser, but opted for the WeCreat Vision mainly because of the enclosure. (I have kids) I believe it was the best choice for us. And the money I saved over the more expensive laser went towards more material. So now EVERYONE in the family has a tumbler. LOL!There were a few "issues" that weren't issues at all. Just inexperience. A big thank you to the more experienced engravers that post videos. Overall, it's fun learning and perfecting projects. (My OCD talking? lol)

After days of setting up, adjusting axes according to documentation, using factory default setting and attempting to calibrate SIX TIMES, the engraving on the material never came closer than 5mm to the target location. Wasted a lot of blank material trying to get this working.Waited for more than a week to get here, took time to set up, time and materials wasted attempting to get this to work, and now finally time and effort to return it.Seems like there are so great potential features and software ... but if the LASER cannot cut accurately it's WORTHLESS!