Amazon Basics 1/2 Inch Drive Click Torque Wrench, 20-150 ft.-lb, 27.1-203.5 Nm

Its solid construction ensures durability, while the click feature provides an audible and tactile signal when the desired torque is reached. Easy to use, this wrench offers reliable performance for both professionals and DIY enthusiasts. A great addition to any toolkit!

OK for the price. Good fit to 1/2” sockets. Simple usual adjustment for torque. I did verify the torque applied using 1m rod @ Kg pull scale and it is accurate with 5%. Supplied with neat plastic case, with rear wall screw head mount if required

Seems great for the price, bigger than I was expecting. Couple of downsides I've found, firstly it has torque values for lb/ft and N/m, with the rotations adding 1 - 25, but obviously, a 25 point change in one of these is not the same as a 25 point change in the other, as such the N/m side is just seemingly arbitrary markers that corespond to the imperial units on the other side, making setting to in-between values a guessing game. Not ideal if working on something built in Europe using metric values.The other issue I found is the box, I was always told to reset a torque wrench to 0 when finished to stop it adding unnecessary wear to the inside and offsetting the calibration. You can do that with this tool, but when you do, it's extended too far to fit in the case it comes with. As such it always needs to have some force on it when in the box. I don't know how much, if any impact that will have on the tool over time, just seems like an oversight to me.All in all, seems good value for money, but not a perfect tool, hence the 4 stars.

I’ve used this torque wrench on several engine jobs now, and it delivers consistent and accurate torque every time. The build quality feels solid, the scale is easy to read, and the click is noticeable and reliable. Perfect for car maintenance, especially for critical bolts like head gaskets and wheel nuts. A must-have in any toolbox!

Bought this to tighten up some rocker cover bolts on my Mini's engine cover. Perfect for selecting 88 inch-pounds (about 7 foot-pounds or 10 Newton metres). As that is quite a low torque setting, it was fairly essential to know all the bolts were tightened to the same value.I should also say this is still a substantial wrench (despite its quarter inch drive), and it feels well put together. The click is nice and loud as well, so no guess work involved in getting to the correct torque.Easy 5 star.

Broke after a handful of uses. Literally torqued 4 spark plugs and a few bolt and the torque feedback clunk has stopped responding

Good quality tool enabled me to refit new flywheel gland nut to correct torque also very good price

Its "Basic" but performs like the big boys, well impressed.