4th Gen 32 LED Performance Steering Wheel Race Digital LCD HD Display Shift Indicator Lights OBD2 Module Kits

Vicrez steering wheel upgrade: 4th Gen 32 LED Performance Steering Wheel Digital LCD HD Display With Updated OBD2 Module Kit.Besides + 22 leds this kit gives you a faster OBD2 black box with additional OBD2 readings. A better display and lighting with a few awesome extras. Still discovering the newer options and loving the new leds.*if you can solder then you are in luck. I simply unscrewed 4 screws over the lcd display and carefully removed cover. Next remove another set of 4 screws and carefully lift out the main board which has two leads red and black. You can un-solder those leads and solder the new board to the exposed wires. Carefully place board back into wheel and screw in the 4 screws, next swap the new cover over and reattach with screws, but before you tighten them 100% double check that your buttons work easily and then slowly tighten screws. Do not over tighten or could cause the buttons to not work correctly. Finally find your black box and disconnect and replace with new box. Press the button on the box to sync and press the wheels two buttons and hold until display turns on. If successful rev the engine and verify rpms match and leds light up. Then configure the wheel as you wish.*I did not disconnect the battery but you might want to if you don’t feel comfortable doing it live*