VICSEED for MagSafe Car Mount, [Military-Grade] [Upgraded High & Low Temp Resistance] Magnetic Phone Holder for Car Dashboard, 360 Rotatable Car Phone Holder Mount for iPhone 16 Pro Max 15 14 13 Plus

I am completely satisfied with this excellent product. Everything about this magnetic phone holder is great; the materials, construction, ascetics and design are all top tier quality and it is well worth the price.I was slightly concerned when ordering because the surface that I wanted to mount it on was not perfectly flat or smooth but the bottom pad and adhesive work flawlessly and the hold is very sturdy. Just follow the instructions and wait the full amount of time before use and it works very well. Once the adhesive is set properly there is no give when adjusting the holder’s orientation, angle or when you need to pull your phone off of the strong, high powered magnet that keeps it firmly in place.This product looks great as well, it has a very small footprint and does not require any additional points of contact other than the base. A connected charging cable will move with your phone if you want to change from portrait to landscape orientation or anywhere in between. The solar light ring is just icing on the cake and I personally could take it or leave it but I’m sure that some people love it.Overall this magnetic phone holder is exactly what I was looking for and it really lived up to or exceeded my expectations. If you are on the fence because of the price let me assure you that it is a great value when everything is taken into consideration.

The car mount is a very clean, elegant design. My biggest challenge was finding a suitable spot to install this, which is no fault of the car mount. The steps to install are pretty simple -First you adhere the magnetic ring to the back of your cell phone or phone case. They give you several types of rings for different types of surfaces. They include a template to center the ring on the phone, but I found this unnecessary.Once that's done, you adhere the magnetic mount in your car. Note that temperature at time of installation if very important. It must be around 75 fahrenheit inside the car. Clean the surface, expose the adhesive and press it on to the surface. Once this is done, wait at least 24 hours.After 24 hours I tried it out, and was impressed right away. The magnets are STRONG! This mount will hold your phone securely. The holder swivels so you can adjust the angle in 360 degrees to however you prefer.I've been using it everyday for about a week now and love it. I will update this if needed as we get into cold weather. I'm curious how this will handle winter. One thing I can't really comment on is the luminescent ring on the mount. It's supposed to glow in the dark, but I haven't seen this work. I think it needs direct light to build up the luminescence and I don't know how long it's supposed to last. It's not a problem though as cars have interior lights anyway, so it's a nifty little extra and if it looks cool, great.

The media could not be loaded. This is a great phone holder! I have a small car, and I replaced a cup phone holder with this – it freed up so much space!I really like the fact that I do not have to have a metal plate on my iPhone 13 mini case in order for the magnet ring to work. This is such a great convenience, and allows you to see the entire design of your phone case!Despite not needing a metal plate, the magnet is surprisingly strong as well. I haven't hit too many potholes yet, but I feel fairly confident that the phone won't come off the holder when I do.The adhesive for the mount also appears to be quite strong - I've pushed on it with a fair amount of force and it won't budge. There's no problem at all supporting the weight of the phone. The mount base size is small, which is great when needing to mount the holder in tight spaces.I did not attempt to place the mount on a non-smooth surface, so I can't say how well it stays adhered to one. I wanted to place it on a smooth, flat surface, and my car doesn't have many places like that available. Although where I put it worked out well, I'm not sure everyone will have that luck.Whether you find a smooth surface or not, you’ll want to try and find somewhere on the dashboard where you can mount the base vertically (i.e., on the front or edge – not flat on top of it). That’s because the maximum tilt of the ring magnet holder does not allow you to angle the phone forward very far. That’s probably to optimize the weight/balance ratio to prevent the phone from demagnetizing and falling off the holder, but, if you're only able to place the holder in limited places, it might make for an unacceptable viewing angle (i.e., it will be tilted too far back). This would be especially difficult depending on where the sun is, as it could cause a lot of glare on the phone's screen.Oh, and it looks great, too! I especially like the fluorescent silicone!

It is very strong and stable. I recommend this product.I used in my old Saab and it never moved.The product is easy to fix and to adjust in many direction

Works great, strong magnet and adhesive. Phone audibly clicks into position and is secure. Have used for cross country drives with no issues.

This is a great mount although the adhesive didn't last. The manufacture did replace them though for free.

So I’ve gone through 6 different car phone mounts in the last 2 weeks trying to find one that both works in my car & with my phone (iPhone 13 Pro with case & wallet/finger strap).The one small vent mount I originally had worked but just barely, the other 4 adhesive/vent clip mounts I purchased to try either didn’t stick, couldn’t hold the weight of my phone or were too small. This one so far both fits & holds my phone with ease. So here’s to hoping it maintains this success!

The media could not be loaded. I have to say the costumer service is by far one of the best I have ever had. They are amazing and made sure I had everything I needed after one magnet got loose. The holder lights up at night and it’s super strong . The sticker are a bit a problem if the holder and phone are under the sun , however is a mild issue. Other than that is by far the best holder I have had and planning to keep it and replace it if needed.

Ich habe die VICSEED Handyhalterung Auto Magnet für mein iPhone 14 Pro gekauft und bin absolut begeistert. Diese Handyhalterung hat meine Erwartungen übertroffen und verdient definitiv 5 Sterne!Die Montage dieser Halterung könnte nicht einfacher sein. In nur wenigen Minuten hatte ich sie problemlos in meinem Auto angebracht. Die mitgelieferte Anleitung war klar und verständlich, und alle erforderlichen Teile waren im Lieferumfang enthalten.Was mich am meisten beeindruckt hat, ist die starke Magnetkraft dieser Halterung. Selbst bei unebenen Straßen und holprigen Fahrten bleibt mein iPhone 14 Pro sicher an seinem Platz. Ich mache mir keine Sorgen mehr darüber, dass mein Handy während der Fahrt herunterfällt. Es hält sogar bei intensiver Sonneneinstrahlung, was für mich ein großer Pluspunkt ist.Die Verarbeitungsqualität ist ebenfalls erstklassig. Die Halterung fühlt sich robust und langlebig an, und ich bin sicher, dass sie mir lange Zeit gute Dienste leisten wird.Insgesamt kann ich die VICSEED Handyhalterung Auto Magnet uneingeschränkt empfehlen. Sie ist nicht nur super einfach zu montieren, sondern hält mein iPhone 14 Pro auch sicher und zuverlässig, selbst bei widrigen Bedingungen. Eine großartige Investition für jeden, der sein Smartphone sicher im Auto nutzen möchte!

Die Halterung ist perfekt. Das Handy wird durch den Magnet gehalten. Die Halterung ist optisch ansprechend und auch nach mehreren Monaten hält sie immer noch fest. Ich kann diese Halterung nur weiterempfehlen

Mein Armaturenbrett hat wenig Platz für eine Handyhalterung. So befestigte ich diese an einer schmalen Schràge . Die Befestigung des Handys war ein Kinderspiel. Selbst auf ruckeligen Straßen blieb alles stabil. Was den Kleber unter wechselnden Temperaturen anbetrifft, fehlen mir noch die langfristigen Erfahrungen. Bis jetzt aber ein stabiler Eindruck!

Diese Handyhalterung überzeugt durch ihr schönes Design und ihre hochwertige Optik. Sie macht genau das, was sie soll, und hält das Handy sicher in Position.- Die Halterung sieht sehr schön und qualitativ aus.- Sie hält auf geraden Flächen bombenfest. Ich habe sie mehrmals abgenommen und wieder befestigt, und der 3M-Kleber hält immer noch einwandfrei.Ein kleiner Nachteil ist, dass sie auf unebenen Flächen nicht hält. Auf glatten, geraden Oberflächen funktioniert sie jedoch hervorragend.Ich habe dieses Teil schon seit über einem Jahr in Verwendung und bin weiterhin sehr zufrieden damit.Insgesamt ein tolles Produkt, das ich nur empfehlen kann, solange man es auf einer ebenen Fläche verwendet.

Gute Qualität. Einfache Montage dank guter Klebe-Pads von 3M. Hält bislang fest, trotz geriffelter Oberfläche im Auto.