Youngman Group Roof Hook Kit for Adapting Extension Ladders

Prompt delivery. The construction is robust and it is easy to assemble (the diagram in the instructions is small and not particularly clear but it's not exactly a complicated item!). Once fitted to the ladder, the hooks worked fine when I used them on the roof.

I bought these to attach to my ladder, they were good quality and value for money but a little fidley to fit without a 11mm ratchet spanner or 11mm deep socket for a socket wrench so I will be buying one for next time I need to use the roof hooks.

Arrived promptly with all the parts. Easy and quick to assemble and is safe and robust to use. Once bolted to your ladder it isn't something you take off and put on regularly, so ideally stays in place. Really pleased to now be able to repair our roof.

Good item

they work well for thier purpose

Others mentioning that the U-bolt doesn't fir the holes in the brackets - the instructions are wrong. You don't use a bracket for the initial bolts (on the second rung) - just put the bolts through the square bar and washer/nut them on. Use the brackets for the first rung U-bolts.So anyway - the instructions are misleading, and it requires a bit of brainpower to see where you're going wrong. Easy to do once you figure it out.Bolts are a bit long - you'd think they could have been machines to the correct length so there's not a big bit sticking out, and who the hell uses 11mm nuts!?Otherwise, does the job if you only need it occasionally.

The crawler ladder was a very good buy it did the job perfectly. It felt safe and strong but light enough to manoeuvre quite easily. Service was excellent as arrived on time as promised.

I'm only part way though attaching this to my ladder. The instructions are rubbish and how it goes together is not intuitive. It looks like these bars are to go across the hoop, but clearly they are not. From the instructions I can only guess at how they should fit. Also the nuts are those with an internal ring to stop them coming undone and so they cannot be done up with your fingers. As a result they take forever to run all the way up the thread. You really need a long reach 10mm socket and ratchet set, which I don't have!UPDATEYou actually need an 11mm socket - who on earth uses that size?! I used a long reach socket and powered it from my impact driver, and the socket was still not long enough, but would have taken forever without it. Those U brackets are too long too, no matter what ladder you use, they will not be that big so they are another hazard to your skin unless you cut them down.The photos should help with assembly. Once built and excess cut off, it works fine. A little more care and it would be a much better product.