REPTI ZOO 67Gallon Reptile Large Terrarium Upgrade Glass Front Opening Tank Sliding Door with Screen Ventilation Reptile Terrarium About 48" x 18" x 18"(Knock-Down)

I was very worried about this coming in bad condition, but they really packaged this impressively well! They wrapped all the glass pieces in this plastic cover to prevent scratching, and covered in styrofoam very well. I saw a review saying they only got the base of the tank, and I thought same first but that’s because the glass is packed well underneath it. They also give you these cool white gloves with grip to handle the glass without ruining it. Each piece fit perfectly, and I was quite impressed. The tank is nice too! Couple things to note though, it is slightly smaller than dims suggest, I was worried about it not fitting on my table because dims say 48 inches long and my base was only 47 inches. But somehow it fit on my 47 inch table with some room. I would have to say it’s only about 46-47 inches in reality. Also I had to add some weather stripping to the front of the tank because there is a small gap in between the two sliding doors, and I’m worried a baby snake will come right out. If you have a small snake you’ll probably need to do the same thing until it’s bigger.

Absolutely the best product I've purchased on Amzon or online in general. Delivery was on point and careful. The product is outstanding. Honestly better that I expected. It's easy to install. This product was packaged carefully.Installer warning. Be careful because it is glass. Put pets away when assembling. Be careful with taking the glass wrapping off. The edges are sharp enough to cut your wrist if you just tug on it and pull. It's good glass. The product is amazing. Finally something worth buying. Install takes roughly 30 min. There aren't many parts, I just took my time with all the pieces and unwrapping things with care. 20-30 min install.

Perfect spacious tank! Assembly was easy and it was such a nice upgrade for my skink. So spacious i’m gonna need to buy more decoration!

it's nice and good quality the only con was my snake escaped, there was the smallest crack and he pushed the rest of his way through the glass door. never saw him again

If you’re here looking at larger tanks you probably already own a pet that is big enough to need a good amount of space, a couple of heat zones, accessories (basking, a hide, feeding, etc), and a budget of a few hundred dollars. So in this review I’ll assume that.There are several very similar tanks available, and it was hard for me to distinguish between all the features. This one met all my preferences and Hopefully this helps sum up:- WIDTH AND HEIGHT: 18 inches (sometimes 67 and 85 gallon measurements can be confusing, and this is $100+ cheaper than the 24-inch wide one that is otherwise the same. (If you have $500, a really big pet and also a table or stand that can support 2 ft wide and ~90 lbs, head for the 24x18 - otherwise this is a great midrange.- It is 4 ft (48 inches) long. (to get a quick idea of this size, stretch both your arms out. And from one fingertip across to about the other elbow is +\- 4 ft.) If you have an adult bearded dragon with accessories this is a really good size for heat zones and for them to move freely - 3 ft long (36 inches) long for a tank to me is quite small, even if it is a lot cheaper.- It has TWO SLIDING front glass panels - there are double grooves in the front so either panel slides fully over - giving you about 2 ft of access to either end of the tank. If you prefer swinging door(s) this tank is not it.- This one is a big feature: it is COLLAPSIBLE - it arrives packed mostly flat, AND can be broken back down for storage or transport. The base is assembled already and is 4 ft long by 4 inches tall and water-tight. Then the side, front and back panels (which are tempered glass) come flat and are assembled with corner and center poles- Two mesh SIDE VENTILATION panels are half-height and so combine with half-glass panels for better airflow. *Note that above 4 inches tall, the tank will NOT be water-tight- 4-cord CABLE MANAGEMENT port on one side, if you need to run cables inside the tank (I don’t, but It’s there if you do)- Metal mesh top with plastic outer frame. The frame itself is screwed in to the corners of the tank (for stability since it is assembled from pieces), but you can remove the mesh with latches. The top is not hinged, so this would be for cleaning, etcNOTE ALSO: Get lamp stands if you don’t have them. The mesh in the lid is metal, but the outer frame of the lid is PLASTIC - so you’ll need lamp stands to keep the lights up off the lid so the edges don’t melt. Plus, even though you won’t be opening the lid much, mercury vapor bulbs are super delicate (and also $$$) so should be moved/jostled as little as possible.This tank is really ideal for a single adult bearded dragon. For a pair, the minimum size would be 80 gallons (40 per pet) so you’d want the 24” wide tankIf you are a new bearded dragon owner (I don’t know about other pets), be sure to check the wattage of your full spectrum UVA/UVB lights to make sure you’re getting adequate heat down to the bottom of the 18 inch-tall tank on the cool side, and have a climb or basking area that your pet can get within 6-12 inches of the heat on the hot side and it is still around 105 degrees. So a basking area that is 8-12 inches off the floor.I have the tank set up and just need to put accessories in before Jasper gets his new home, and I’ll update with pics of my handsome fellow!

Easy set up