Swing'n'Slide Ws 5031 Olympus Wave Slide 2Piece Plastic Slide for 5' Decks, Yellow

Good product, a little pricey but less than other places. One note, the flange holes that are used to bolt the sections together with the plastic sections don't line up very well. I suggest drilling out the slugs left in the plastic that didn't get completely punched out. ( to give more clearance for the bolts )

Easy to bolt together, took me maybe 30 minutes. Installed to a 5 foot swingset deck with four power lag screws. The kids love it! I’ve used it a few times myself (210 lbs) and it’s very sturdy!

The slide got here quickly. I'm happy with the durability and quality of the product. But the screw holes did not line up and I had to redrill all of them. They were not just a little bit off, some of them were completely misaligned to the point where you couldn't see to the other side. So you would need a very sharp 5/16 inch drill bit.

The slide seems good and solid and the grandkids like it.Ease of assembly: Many complain about the assembly saying the holes don’t line up. They are correct, the holes don’t line up. Had use a drive to get an alignment. The company should provide bolts about 1/4” longer, as I had to use clamps to force the parts together in order to thread the nut. A couple of holes are in tiny spaces where larger hands don’t fit. No mounting bolts for attaching to the deck. No bolts or stakes for the bottom, even though the directions say they are required.Value for the money: fair.

This seems to be just what I was looking for. It is a custom job and required some thinking on how to install in my custom playhouse. Directions are straightforward, a clamp as well as following the torque sequence in the directions made it very simple. The bolts were plenty long enough as long as you use a clamp, a screwdriver is helpful to "pry" the holes into alignment but overall a pretty simple process. Assembled and installed in about an hour even with modifiing the already made deck and railing.

Good slide but assembly was more difficult than it should’ve been. The metal supports don’t fit easily within the plastic frame until after you’ve gotten all the bolts tightened. The problem is the bolts are quite short and you can’t get them far enough through the metal plate and the holes in the plastic frame to get a nut on them. Clamping helped and some holes needed slight drilling to fit. The bolts need to be at least a quarter inch longer!!

One of the worse things I've ever assembled. NONE of the holes lined up, had to drill out new holes, bolts that it came with should have been longer, was difficult to mate together. Had to trim the plastic to get it to seat correctly. Do yourself a favor and buy something else!