High Lifter 2" Suspension Lift Kit for Polaris RZR 800 EPS & XC PLK800RZR-01

I had to grind the front spacers down about 1/4 inch to get them to fit the a arms. Other than that everything was good.

Just installed this over the weekend and am very happy with the results. A two inch lift was claimed and that is pretty much exactly what I got. The actual before and after measurements showed a 1.75" ground clearance increase in the front and 2.25" in the rear. The resulting ground clearance was 12.25" in the front and 12.00" in the rear. This was what I was hoping for. I didn't want to go too high but wanted more ground clearance than the stock RZR provided.The kit was pretty easy to install if you know your way around hand tools. The instructions had a couple of mistakes but I was able to work around them without difficulty: 1) Step 5 for Front Lift and step 6 for Rear Lift both say to use the large spacers and no where do the instructions say to use the medium spacers. I found that the medium spacers fit best for the Front Lift and the large spacers for the Rear Lift. 2) Step 3 for the Front Lift says to remove a small spacer. My RZR did not have such a spacer. Perhaps different models have it. I didn't remove it in step 3 so naturally I didn't reinstall it in step 7.The rear install was a bit difficult due to remounting the shock to the new bracket. The shock is too long to just drop into the new mounting holes.You could actually use a spring compressor to collapse the unit a bit to get it to fit. I ended up removing the bolt from the bottom of the shock, attaching the top of the shock to the new bracket, then using a pry bar to push the bottom of the shock up into position so that I could reinstall the bottom bolt.None of what I've mentioned was really a problem if, like I said before, you know your way around hand tools. Overall, I'm very happy with the result. All the parts are made from high quality materials and fit perfectly.

Exactly what I ordered. Fit exactly as it should. Just seems expensive for few bolts and few pieces metal cutout. But gotta have it.

The kit was sent early and is exactly as promised.This kit DOES NOT FIT 2014 RZR 570LE.The front fits well but the rear does not fit at all.

Put one of these on my RZR 800. It was hitting the bottom a lot. This got me up high enough to avoid most rocks and debris. My brother was so impressed he too bought some of these. Downside is it lifts the center of gravity. Mfg. leaves the machines low for a reason. All in all the benefits outweigh the safety factor. Need to caution a buyer to remember when you put these on your center of gravity is more dangerous. Food for thought.

Bolts for the front wheels are toooooo long and will rub the tires on a tight turn. Need to be 3/4" shorter

Everything work good

Everything was great!