- Add a 10 Gigabit Ethernet port (10 Gbps) to a client, server or workstation through a PCI Express x4 (or higher) slot.
- 1 Port PCI Express 10 Gigabit Ethernet Network Card.
- PCIe x4 10Gb NIC.
- 802.3an 10GBASE-T NIC.
- 10Gbps Ethernet Adapter.
10Gbps PCIe networking over standard Cat 6a cabling IEEE 802.3az
compliant energy-efficient chipset Virtualization (VMWare® ESXi
and Microsoft Hyper-V®) and iSCSI support Compliant with PCI
Express Rev 2.0 specification, using PCIe x4 (or higher) slot
Backward compatible with 1 Gbps and 100 Mbps networks Up to 16K
Jumbo Frame support Supports 802.1q VLAN Tagging Supports
Checksum Offload (IP, TCP, UDP) and Large send Offload Configured
with standard profile bracket, low profile/half-height bracket
included The ST10000SPEX PCI Express 10 Gbps Network Card lets
you add a 10-Gigabit Ethernet port to your server or high-powered
workstation through a PCI Express x4 (or higher) slot. With
rising demand on network resources due to large file transfers,
increase in network users and multimedia content, more bandwidth
is often required at various levels of your infrastructure. This
10 Gb NIC offers a cost-effective solution for your file or
application server or even a high-powered workstation to transfer
more data, faster. Fully compliant with the IEEE 802.3an
10GBASE-T standard, the card offers added bandwidth over standard
Cat 6a cabling, to meet your network needs without an overhaul of
your infrastructure wiring, or a costly upgrade to fiber. The 10
Gbps network card also offers compatibility with VMWare® ESXi and
Microsoft Hyper-V® virtualization software and iSCSI support to
combine LAN and SAN functions. For peak operating efficiency, the
10GBASE-T card features the Tehuti TN4010 chipset, compliant with
802.3az Energy Efficient Ethernet and with significantly reduced
power consumption versus the popular Intel® X540-AT1 chipset. The
reduced power consumption also helps to minimize heat generated
by the card, to avoid increasing the operating temperature within
your server case. Power Consumption Benchmark The card also
supports 16K Jumbo Frames, 802.1q VLAN tagging and is backward
compatible with 1 Gbps and 100 Mbps network connections. For
added versatility, the controller card is equipped with a
standard profile bracket and includes a low-profile/half-height
bracket for installation in small form-factor computers. Backed
by a StarTech.com 2-year warranty and free lifetime technical
support. Add 10Gbps network connectivity to file or application
servers and high-performance workstations Upgrade your onboard
network adapter to 10 Gigabit for faster communication Create a
video / audio editing console with 10 Gbps access to network
storage Scale your network performance to meet increased demand,
with 10 Gbps speed Increase your bandwidth using existing Cat 6a
infrastructure, avoiding costly fiber upgrades Reduce power
consumption and cooling requirements for your server, with an
energy-efficient chipset Specifications Warranty Information
Warranty 2 Years Connector(s) 1 - Connector Type(s) PCI Express
x4 1 - External Ports RJ-45 Hardware Ports 1 Interface RJ45 (10
Gigabit Ethernet) Bus Type PCI Express Card Type Standard Profile
(LP bracket incl.) Industry Standards IEEE 802.3an (10GBASE-T),
IEEE 802.3ab (1GBASE-T), IEEE 802.3u (100BASE-T), IEEE 802.3az
(EEE – Energy Efficient Ethernet) PCI Express Rev 2.0 Chipset ID
Tehuti - TN4010Marvell - 88X3110 Packaging Information Package
Height 1.2 in [30 mm] Package Length 5.6 in [14.1 cm] Shipping
(Package) Weight 5.3 oz [149 g] Package Width 6.7 in [17 cm]
Performance Maximum Data Transfer Rate 10 Gbps Compatible
Networks 100/1000/10000 Mbps (10Gb) Full Duplex Support Yes Jumbo
Frame Support 16K max. Promiscuous Mode Yes Supported Protocols
IEEE 802.3ad (link aggregation), IEEE 802.1q (VLAN tagging), RFC
2819 (RMON MIB statistics) Physical Characteristics Weight of
Product 1.8 oz [50 g] Product Length 3.3 in [83 mm] Product Width
0.7 in [19 mm] Product Height 4.7 in [12 cm] Software OS
Compatibility Windows® 7, 8, 8.1, 10, 11 Windows Server® 2008 R2,
2012, 2012 R2, 2016, 2019 Mac OS® 10.10.3 to 10.14 Linux 2.6 to
4.11.x LTS Versions only VMWare® ESXi 5.0/5.1/6.0/6.5 Microsoft
Hyper-V® Special Notes / Requirements System and Cable
Requirements Available PCI Express x4 slot What's in the Box 1 -
Included in Package 1 Port PCI Express 10GBase-T Network Card Low
Profile Bracket Driver CD Instruction Manual