🚤 Dive into Reliability with Every Turn!
The 393630 Water Pump Impeller Kit is a complete marine repair solution designed for Johnson and Evinrude outboard motors ranging from 20 to 35 HP. Made from high-quality nylon PA66 and neoprene, this kit ensures durability and performance. It fits various models from 1980 to present and is engineered for easy installation, making it ideal for both experienced mechanics and novices alike.
| Brand | UANOFCN |
| Material | Nylon PA66 Plastic with Housing, Neoprene Impeller and O-Rings |
| Item Weight | 283 Grams |
| Vehicle Service Type | evinrude 25 hp water pump kit, 25 hp johnson impeller, johnson 25hp impeller, Johnson Evinrude 25hp Commercial 1998-2001, 25 hp johnson water pump kit and 25 hp evinrude water pump kit, johnson 30hp water pump, Johnson Evinrude 30hp 1980-Present, 35 hp evinrude water pump, Johnson Evinrude 35hp 1980-1982, Johnson Evinrude 35hp (2 Cyl) 1983 & Later, Johnson Evinrude 20hp 1985 & Later, johnson 25 hp parts, Johnson Evinrude 25hp 1985 & Later, Johnson Evinrude 20-35 hp Outboard Motors, Johnson Evinrude 30hp (2 Cyl) 1983 & Later |
| Weight Class | small weight |
| Manufacturer | UANOFCN |
| OEM Part Number | Johnson Evinrude Outboard 0393630, Johnson Evinrude Outboard 391636, Johnson Evinrude Outboard 393509, Johnson Evinrude Outboard 393630 |
| Automotive Fit Type | Vehicle Specific Fit |
| UPC | 788934577590 |
| Model | johnson outboard water pump kit |
| Item Weight | 10 ounces |
| Package Dimensions | 6.02 x 4.02 x 2.05 inches |
| Item model number | 0393630 393509 391636 393630 |
| Exterior | sierra 18-3382 |
| Manufacturer Part Number | 393509 391636 |
| Position | Lower |
C**I
Works for my 2011 115hp Etec
Exact fit and cheaper than a trip to a repair shop. Make sure you have the proper gasket sealer, a good scrapper that's not going to dig into the sealing surface, and tools for the job.I went on my computer and downloaded a video that walked me through the process. I'm a mechanic by trade but wanted to ensure everything was correct. I've been running the motor now for a couple of months. Peeing just as it's supposed to.No more delivering, waiting, and retrieving my boat from the shop for its routine service.Just follow your owner's manual to make sure you do all the necessary maintenance.
D**Y
Good as new
Fitment was great and works as it should. Good quality
O**O
Works
Worked perfect on my 115 Evinrude
G**S
Works
No as good as oem but great price came with all the extras
G**G
If pump doesn't seem to work
Hi....I apologize it took me a while to get back to you with my results. Here is what I discovered about the pump and will also apply to some of the other comments I read in the reviews with people not getting the pump to work:1.) I removed the pump to check the proper direction of the impeller and it was correct as can be seen in the photo.2.) I built a pump shaft attachement so that I could operate the pump with a power drill.3.) I attached the water muff to the unit and tried to pump water.....it wouldn't do so. What I did see however was that even at high hose discharge and small leakage at the muff I could not fill the water cavity in the housing.4.) I installed a strap around the muff and tightened it very tight and THEN at high hose pressure I was able to get the cavity to fill with water.5.) At that point I activated the drill and was able to get the pump to actually pump water. I then removed the pump housing and removed the O-Ring that resides on top of the impeller, reassembled and it would not pump water. Since the O-Ring sits higher than the original does I wanted to make sure that it was necessary to have it in the pump.6.) I reassembled the engine and kept the tight strap on the bottom and finally it pumped water into the engine.My conclusion that you can reply to other buyers if they have a problem:Do NOT underestimate 2 things....1.)the lack of ability of the pump to draw water up AND 2.)the fact that if the muff leaks it will NOT fill the cavity when common sense says it should. This was a 120hp Johnson. The engine bottom must be immersed fully or the muff must be very tight on the lower unit for the pump to function.Please feel free to post this if you wish.
T**E
1988 Evinrude 150hp
Direct fit no fitment issues
C**W
Parts fit my 150 hp Evenruge
All new parts needed were included, made installation go smoothly. I did use a plastic wire tie to compress the impeller. ( be sure the impeller is compressed in the correct angle)
J**S
not worth it
I took a chance because of the cheap price, nothing in kit looks or feels as strong as the factory kits. Installed fine and worked initially but after less than an hour on the water the soft impeller key failed and left the new pump useless.
Trustpilot
5 days ago
4 days ago
