Kai TianBlack Silver Super Engineer Screw Fixed Links Watch Strap 316L Brushed Finish Solid Stainless Steel Watch Band 20mm 22mm 24mm with Double Flip Lock Diver's Clasp For Men Women

First of all, this is a weighty, well made strap/bracelet. comparative with what you would get on a mid level Seiko/£5-600. With the added bonus of screw pins.The bracelet is huge, I had to remove 4 links and I have a 7 inch wrist. Tools are supplied (spring bar remove tool, and screwdriver and 4 spring bars).However, if you're not familiar with screw pins, they unscrew fairly easy after about 5 turns, then they won't unscrew anymore. However you will need some fine point tweezers to pull the pins out (they don't just tip or fall out), these you do not get. Luckily I had some. Don't think the pins are defective. As they are not.Great quality, nice brushed finish. Rounded edges so extremely comfortable. Looks a quality, well made and expensive strap.It is weighty though, I fitted it to my Steeldive Captain Willard, and it's a chunky piece to wear, but I like that with a diver.The milled clasp has a nice and firm, secure feel to it, and is a 2 step security bracelet, so this won't be falling off your wrist.I would highly recommend this strap, and I am a fussy ******!

I bought this to replace the original leather strap on my Glycine Combat Sub ‘goldeneye’. There are loads of links provided, I had to remove 6 to fit my just under 7 inch wrist. The screws are easy to remove and the bracelet easy to adjust with the tools provided. The links are solid and the clasp has a milled scissor, pressed upper with security pushers and 3 micro adjust holes. It’s great for the money, I’m delighted with it. I’ve only just fitted it so the only issue will be how well the black coating holds up to scratches.

Good quality strap and easy to adjust and fit, I like the double clasp arrangement to open the fastner.

If it were a mark out of ten I would give it 7.5. The screw links are good and is a definite improvement on the supplied push fit links bracelet that came with my Steeldive watch. For a watch that costs £140ish this strap is the perfect addition. It raises the quality feel of the watch. Do I recommend it? Yes for a Steeldive, no for a Rolex, but I guess you already know that.

I had been after a Stainless Steel Bracelet for my Bremont U22 [which came fitted with a leather strap] and did not want to pay the £605 that Bremont wanted for one. Numerous evenings were spent searching the internet for a suitable bracelet until I found this one. There weren’t many reviews but I decided to take a chance [it was only ~£30; so if I didn’t like it on my Bremont, it would fit one of my cheaper watches]. To say I have been pleasantly surprised is an understatement! As an Engineer myself, I am VERY pleased with the quality of the material, the fit of all the links, the brushed finish and the style. A bonus is the free screwdriver, the spring pin removal tool and the spare spring pins. I do agree with one of the other reviewers in that removal of the screwed in link pins requires either a pair of tweezers or [as I had to use] a small pair of long nosed pliers. This bracelet really is the quality of a much more expensive one!

Bought two different styles of Kai Tian stainless(?) straps. Both returned as both suffer from the same issue.Namely the link retaining pins are rubbish, they either:Have already stripped threads upon leaving the factory, and just spin when trying to unscrew them!The threads are bad and you can not fully screw them back in!Or the slots in the pins are knackered!There a lot better straps available, these are clearly not worth the £31 asking price, quality control is poor!

I bought this strap to put on my Casio Oceanus which I wore with a leather strap. The bracelet is top quality and feels just right. There is enough adjustment for my very thin wrists with a link to spare and the fine adjustment o the buckle lets me wear it with exactly the amount of slack that I like. It comes with a 4 spring pins which allows for breakages or 'pinging off', a bar tool (I tend to use a pen knife) and a screwdriver. The bracelet comes in a smart box, in a sealed packet with cellophane wrap. A very good quality product and excellent value.

Ordered yesterday and came today, I'm realy impressed by the quality and exelent packaging , I have large hands and wrists, but had to remove 2 links and adjust the clasp adjuster for a nice comfortable fit, and I have to say this strap looks better than the original even though this is my everyday watch and has seen its fair share of the front line, so to speak, I was forever busting the spring pins, so hopefully this will be better, it feels nice and solid, heavy and I think it suits the watch, it came with 4 spring pins, a screwdriver and a pin tool, and everything worked perfectly.I have a number of watches, and would certainly order from this company again for straps ect,Good product and good service.

Alles Bestens, schaut gut aus und trägt sich angenehm, ist sicher eine gute Qualität.....klare Kaufempfehlung

Realmente parece metal de un reloj caro de alta gama, no me esperaba tanto. Y lo digo que tengo Rolex, Omegas y tudors. Totalmente recomendable. Lo compré para un reloj de submarinismo que tengo dos iguales y así no llevarlo con correa de caucho y me quede parado de la calidad.

Il bracciale è stato montato su di un citizen aqualand. È in ottimo metallo e molto pesante. La chiusura è in metallo fresato (ottimo). Le maglie smontabili sono fissate con perni a vite. Nella confezione vi è un cacciavite, 4 perni per il fissaggio alla cassa (quelli originali sono troppo grandi e non passano nel bracciale) e uno strumento per lo smontaggio dei perni. Il bracciale (misura 24 mm) è molto grande e non può essere stretto oltre un certo limite. La satinatura è ben fatta.

Mooie band voor m'n Galaxy watch 6 classic..absolute aanrader.

J'ai acheter ce bracelet de montre pour équiper ma Samsung Gear S3 Frontier car je travaille dans la maintenance industrielle et les bracelet en PU ou en nylon ne résistent pas longtemps.Cela fait 3 mois que je l'ai et je le mets tous les jours de la semaine. Chocs, meulage, soudure à l'arc, mécanique, bricolage,... Rien ne lui fait peur.La teinte noir tient très bien et ne s'est usée qu'à l'intérieur du mécanisme articulé de fermeture (frottement). Sur la partie visible du bracelet je n'ai que quelques micro-rayures. Ce qui n'est rien en comparaison de ce que je lui fais subir.Je la mise à la taille du bracelet se fait via des vis sur le coté. Je ne connaissais pas ce type de montage mais c'est très pratique et rapide à faire.Je suis très agréablement surpris par la qualité du bracelet et je ne regrette pas mon achat pour le moment.