John Timberland Hepworth Traditional Outdoor Light Post and Cap Base Black Iron Aluminum Pole 76 3/4" Accessory for Exterior House Porch Patio Garage Yard Garden Driveway Home Lawn Walkway

This lamp post is attractive and sturdy. Cast in aluminium it comes in five pieces that thread together very well. The top piece may not be needed for lamp fixtures needing a 2" vs. the 3" fitting. This is the third one I've gotten and never have I had an issue.Installation is relatively easy depending upon how it's done. I've installed one on concrete and couldn't use the supplied J-bolts, instead using concrete anchors using the triangular plate supplied as a template. On the other install I had to embed bolts in wet concrete but this was as easy. Seriously, the hardest part was mixing the concrete. Once the bolts were secured (anchor bolts and concrete set) I used three nuts on the bolts, washers, and then the metal plate and another three washers and bolts above. I used these to adjust the level of the metal plate. Once leveled and tightened, the base flare slipped over the bolts and was fixed down with acorn nuts. The post came with acorn nuts but they didn't seem to fit the 3/8" threaded rod I used with the concrete anchors. The installed posts look great in my lawn even without the grass yet around them.I noticed that the threaded portion of the lower piece was 3" which happened to be the size needed by the lamp fixture I used. This works well for a spot where I don't want the whole height of the post but still want matching bases.

I wanted to run a light into my front yard. I found the light, but needed a post. I saw this one on Amazon. It gad good reviews, so I thought I’d try it. The only issue was the light had a transformer that would not fit. I had to remove the top section, but otherwise, it works well. I like the way it worked out and love the look.

This appears to be a zinc die caste design. Unit ships in four pieces (base/lower mid-section/upper mid-section/top cap) and screws together easily with no threading issues. I was looking for a post design that mounted to a concrete surface and found this unit. Most post systems I found are in-ground mounted (dig a hole and secure by pouring cement around the post) but I needed something that would install to an already poured concrete surface. The system comes with three J-hooks that should be installed prior to pouring your concrete. Installation kit also includes all necessary bolts, washers and lock washers needed. Manufacturer also includes a metal template that aligns the j-hooks and is used to locate the exact position of the mounts. However, if you already poured your concrete you can use the same template and purchase three tap-con concrete anchors (or similar) and this also works great to secure the post. The traditional design is great for almost any style home and the zinc die cast parts and finish mean this unit will last a very long time.

Easy to assemble. Very sturdy. Put a standard 3" post lamp on it. Fits perfectly. Overall, great lamp post.

For a relatively inexpensive product this is nicely cast and attractive. It’s not perfectly straight but it’s very close. My family is very happy with how this has added charm to the end of our driveway

Good quality, great price

I power them with 12v garden transformer for ease of installation and use matching 12v led lamps.

the light pole was ordered for a trial fir it fit our original base mounting so we are going to keep