Moukey Microphone Pop Filter Mic Shock Mount Rode Set for AT2020 Studio Condenser Microphones, Anti-Vibration MMs-9

I was a bit skeptical about buying this at first because I wasn't sure if it would actually fit my mic. I have a RODE NT USB and it actually fit pretty well. Sure it's a bit tight and the buttons aren't super easy to rotate, but it does the job and blocks out a fair amount of noise compared to when I don't have it on. All in all a good product.

This is a great product - it works perfectly - see photo. It took me a little while to work out that it's best to put the pop filter on first and make sure the bracket is the right way up - then squeeze the clips on the shock mount and slide the base of the mic in. It's probably in the instructions.

The AT2020 is my favourite budget mic and this is a nice little upgrade. The pop filter does a decent job and improves rejection of plosives quite well (although in testing is not as good as a proper separate fabric filter). The shock mount has to go the 'wrong' way up to allow the pop filter fit but this still works and looks OK. There are no instructions in the box so expect to play around with the setup a bit until you get it all aligned and fitting OK.

the shock mount and filter will not fit a 48mm microphone. The collar is too big on the filter and the shock mount is like 2-3mm too big for 48mm even though they advertised it for 46-55mm. Hence why I gave it a 1 star. The quality is decent however so if you have a big mic then this is nice.

Despite being advertised as for Blue Yeti USB mic, this mic shock mount is far too small.misleading advertisement.sent it back immediately

The pop filter does not fit the microphones that fit into the shock mount. The pop filter would fit 62 - 66mm or 66 - 70 mm.

Very solid construction. Pop filter real easy to fit and very effective. Superb shock mount

this is OK for a home studio. Not cheapo plastic, but not a piece of kit for a professional studio.Actually pretty quick to arrive.