EZ-POUR Gas Can Spout Replacement – Multi-Use For Deluxe Gas Cans and Water Jugs (Pack of 2) - 1, 2, 5 Gallon HI-FLO System with Extension, Flame Arrestor, Flexible Gas Can Nozzle for Jerry Cans

Had an older container that I needed to use since the new one was damaged. I didn’t have a spout. I gave this a shot and it’s worked flawlessly. Easy on, No leaks, no drips, sturdy material.

Have six gas cans, six different spouts. This changed that to E-Z, pun intended. No leaks, works great!

It is quite straightforward. If your gas can doesn't have a vent, then you will want to drill a hole and install the vent that is included. Without the vent, you don't get a "draft" and the gas struggles to come out and it is a slow process, especially if you have a larger gas "can". I have a heavy duty 5 gallon gas can and the vent makes a huge difference in how fast you can get gas out of the can.The nozzle itself is quite nice and the included cap is very nice as well. I use the nozzle with the included extension and you want to make sure you screw on and tighten the extension well. I have experienced a minor leak where the extension and nozzle are joined, but I just tightened that connection.Along with the fine and coarse threaded base cap and everything else that is included, this is a nice set, but maybe could be slightly cheaper. If you do not need/want such a long nozzle (as you can create with the extension), then this following set is probably a better buy (bang for your buck) and I own it too:https://www.amazon.com/dp/B0BY3W4D2K

I have 4 five-gallon gas cans (all of them the "new" style) that I leave in the garage for our portable generator, snow thrower, and other various gas yard equipment. I bought one of these kits to make sure it would fit and work first before I ordered any more of them. Worked like a charm and just ordered one more kit. On two of the cans, this product worked great. So far very happy to have my cans back to the way they were before the gov't got involved and messed it all up. Of course, since they are the "new" style cans, I had to create a new vent hole on the opposite end. I used a 1/2" wood paddle bit (a.k.a. flat wood or spade bit, which is mentioned by name on the manufacturer's FAQ page on their website) and was able to install the little included push-in vent without a hitch. After reading some other reviews that said not to drill the hole directly on the center seam of the can, I followed that advice and drilled just slightly off to the side. I still have a few inches of gas inside the can and I know there's a chance that a little bit of plastic debris may have made it's way inside during drilling (a lot of it fell outside the can though) but I'm just going to tempt fate that the screening will catch it all until it's empty and then I will rinse and clean it out thoroughly and let it dry for about a week or so before filling it back up again. As for the other two gas cans, the kit would not fit them, and after looking at the manufacturer's compatibility info on their web page, I don't think there are any workarounds to it. The 2.25" inch mouth on the can appears to be too big for any of the manufacturer's kits or adapters to fit the mouth of the can. This is the can that it would not fit: https://www.amazon.com/gp/product/B000W9JN4S I bought it back in 2011. That is why I only ordered one kit at first to check compatibility first instead of any multi-packs. Turned out to be the right move instead of having to deal with returns now. Make sure that you check that the spout is a correct fit for your can prior to drilling any holes. Overall very happy with the purchase and would definitely recommend to anyone who wants to go back to the way it was when gas cans were simple and easy before the gov't got involved.

Works as intended. Replaces the stupid spout that comes the can. I tried an off brand and it leaked. Spend a little extra money and get the real thing.

Excellent product, solved my problem perfectly. Needed an extra length spout for my old Blitz 5 gallon gas can so I could insert it in the boat tank receptacle before pouring vs. the old, short spout that required a Hail Mary air pour on the way to the receptacle, often resulting in some (or much) spillage. Even better, the new EZ-Pour has a larger diameter that increases the flow rate dramatically, cutting the time it takes to pour 5 gallons from minutes to like 30 seconds, gotta love it!

I needed a spout replacement because the original one was leaking when I poured. This fits my old style gas can perfectly and does not leak.

Leaving a 3 star review since the quality of the item appears generally good. However, be aware that this product will not fit the newer “No-Spill” brand gas cans.

Great product. Prevents spilling gas when refilling lawnmower and outboard etc.

It's perfect, makes topping up the boat tank easier and faster!

Replacement of garbage CARB spouts all gas cans come with. These just work, don't leak, and don't spill. Way more Eco friendly than the rash California is forcing us to use.

Seems to works well my older cans.

Useless for me