Nylon Cheek Rest Buttstock Shell Carrier

I am impressed with the construction and overall quality. What I would recommend to the manufacturer is to shorten the back two straps. Especially the rear one. My rifle has a very tall stock and the straps were still too long. I had to trim them. Also the velcro on the straps are not properly positioned.

The placement of the new Osprey Signature scope on my rifle required a higher cheek placement than what most cheek rest buttstocks offer. The Tourbon Nylon Cheek Rest offered three separate riser cushions for a custom, comfortable cheek weld. Since I own two other Tourbon products, (which I have been very pleased with), I decided to go with this particular model and am very please with the results, looks and performance. Yes, the straps are a bit long but they tuck up nicely under the flap and provide a clean look, comfortable fit to the cheek and as yet the entire carrier has not moved out of its' position placement.

This cheek rest is perfect and does exactly what I needed it to. The three foam inserts are great so you can adjust the height of your cheek to achieve a perfect cheek weld, while also providing excellent sight picture. As a frame of reference I use this on a T/C Pro Hunter with 6.5mm Creedmoor barrel. The only thing to be aware of is that the straps are adjustable but didn’t cinch down far enough to fit snuggly on my stock. I was easily able to pull the straps enough to Velcro to the side of the product, which even though I’m not sure was an intended use, ended up working very well. Overall, it’s great! The bullets fit perfectly in the elastic holders as well. I wasn’t ecstatic about it being made in China (a personal preference to try and buy American) but it appears well built and I expect it to last quite a while.

Other than the strap length not being correct (nor are they adjustable), I like it. I've seen other brands that put plastic packing wrap in the hump. This one comes with three good quality hard foam padding inserts. I have a bit of an unusual setup on my Savage 110 Tactical, with a fixed 5x Primary Arms Prism Scope. The darn 110 Tactical comes with various height cheek risers, but they only raise the back side, and because the scope has a very short eye relief, the risers that come with the rifle are useless. This fixed the issue, and it looks good, too.Note I'm using  GDI R-COM E-Model Combat Optic Quick Detach (QD) Scope Mount - fits all Trijicon ACOG and Reflex,Burris 3x / 5x, Primary Arms 3x / 4x /5x sights  to mount the scope further back than usual.

I bought one of these for my Savage model 10T and could not be happier. I saw one review that mentions that the rear strap is too long, which is true... but it is meant to be tucked under the flap for the pocket which gets it conveniently out of the way. The middle height spacer is perfect for my Savage to get a sight picture.I should also say that I have a Mosin Nagant with a brass stacker rail and a long eye relief scope. To date, nothing has had sufficient elevation to get me anything better than a chin weld vs a cheek weld... but this one, I can actually stack the tallest spacer on the stock, and the short spacer above it in the pocket compartment. I lose function of the pocket, but that isn't an issue. I plan to order another one so I have one for each rifle.The quality is actually really nice--better than most I have seen--and although it is a bit more expensive, I am glad I paid the difference.

Put on a Henry Big Boy X .357 to accommodate proper height in conjunction with a Holosun red dot. It is perfect & for this particular rifle I would highly recommend. NOTE: IF are simply using the absolutely perfect fiber optic sights that come on this rifle, there's no need for this product.

Bought this for my son in law, says he loves it and as of yet has no complaints about it

I was so mad at how long it took for this item to ship to me I was going to give it 1 star but it works perfectly on my rifle. It works so good that I almost forgot about how long it took to get to me. The only flaw with this riser is that you expose the foam insert everytime you access the pouch for your small items

I bought this some time ago for my .308 Steyr ssg. It is very well made and easy to fit and remove from the stock, when you need to insert and remove the bolt. I compete in long range target shooting and this has been superb.

Puchased this for my Tikkat T3 Lite in .223 as I was finding the the stock a bit low for linig up on the scope and holding a steady position. What a difference. I would thoroughly recomend this item. Good quality and very affordable. Will fit most stocks as there is plenty of room for adjustment. Accuracy has certainly improved as more relaxed when in the shooting position, comfort increased greatly also.

This synthetic cheek riser does exactly what it says on the tin. It makes for a good cost efficient check riser solution for a rimfire rifle (such as a Tikka T1X MTR).Pros:The three riser height pads provide enough flexibility to adjust the height of one's resting check on the rifle buttstock for a decent and comfortable level of eye relief from the rifle scope.The synthetic material is water repellent, so can deal with rain and other wet conditions. The material lends itself well to cleaning.The velcro straps provide enough adjustment and stability to fit most rifle buttstocks securely (even rimfire rifle stocks) – out of the way from standard sling stud points.Cons:The adjustment straps do not have enough velcro material across the length of the strap – just the end parts of the strap. This requires unique and inventive ways of getting the straps to fit securely under the flap to get as much velcro seal. This means you can’t cut the lengthy ends, as this is where the velcro is on the straps. This is a problem with smaller rifle buttstocks.The pocket is useless as it is under the flap that wraps over the riser height pads to secure the straps with velcro. To get to the pocket, you have to undo the flap – undoing the entire adjustment. Useless and faulty design. I would prefer an outside pouch with a velcro closing flap – instead of the bullet / cartridge holders.The bullet /cartridge holders are useless for rimfire ammunition sizes (that is, .22LR / .17 HMR). You can undo the stitching on some of the holders in order to fit two rimfire rifle magazines (such as, 10-round magazines of Tikka T1X or CZ457). Otherwise, these bullet / cartridge holders are useless as the rimfire ammo falls right through the holders. I would prefer a model without the holders, or better yet, with a functional outside pouch with a velcro closing flap.It’s a decent and cost efficient cheek riser solution for a rifle buttstock.

Although cost more than others very well made came with 3 different size inserts so can use on all my rifles, good quality build very pleased with this item.

Great alround product. Liked the comb adjustment and well built. Didn’t need the round holder part and would of liked one without. No complaints from me.