💦 Refresh Your Water, Refresh Your Life!
The APPLIED MEMBRANES INC Replacement Filter Set is a comprehensive four-stage filtration solution designed for Culligan AC-30 RO Systems. It includes a 5 Micron Sediment Prefilter, a Coconut Shell Carbon Block Filter, a genuine AMI RO Membrane (36 GPD), and an Omnipure Coconut Shell Carbon Filter, all made in the USA and NSF certified for performance and safety.
J**
Easy to install
Fits and works well in my Culligan AC 15 reverse osmosis filter system.
R**K
Exact replacement for a Culligan AC-30 RO system
Very good quality at a very good price. Easy to install. Not the least expensive but worth the extra money based solely on the quality.
L**S
Great package BUT, check part numbers!
Great value and this isn opposed to be the 4 filters for the Culligan A-30 RO System but stage filter #3 was not the exact fit. My husband was able to trim the end piece to make it fit and work but it was not the exact match. Also, we need to drain the mail bottle and add air so if you have problems w pressure this fixes it! Watch a YouTube video about. Great price. It beat out DiscountFilters.
M**E
Works great
After a different company sent two that looked like this filter system (same pic) were not the same and didn’t fit! these ones from this company fit correct.
M**.
Poor quality RO filter cartridge
Very poor quality filter cartridges. Was not at all happy with the quality and would not purchase again and would re that Amazon have a third party lab do a QA check on this filter cartridge set. We had very poor taste coming from the water and an oily taste. I will not purchase another. And disposed after 3 days.
K**H
great!
Finally a filter kit that fits and works well. The water is clear and tastes good. International shipping is fast too.
V**R
Doesn’t remove enough sediment
I’m disappointed in these. They fit perfectly and were easy to install. However, they are under-performing. I have a TDS meter to test the amount of total dissolved sediment in my water. These filters are taking less than 90% of the sediment out of our water, and that’s after I ran several gallons through the system to flush the new filters AND waited a whole week to make sure the new membrane was fully functioning. Our tap water averages 350ppm of sediment. With Culligan filters, our RO water registered below 20ppm. I tried another brand of filter and averaged below 35ppm (not great but at least 90 percent). But with THESE filters our RO water has 45-50ppm of sediment. Brand new filters should not function so poorly, and if this is how they perform when they are brand new I cannot expect them to last long. I guess you get what you pay for.UPDATE: after about 8 weeks of using these filters, my TDS readings started to rise and rapidly got above 100ppm. I decided to try replacing only the first filter which I believe is called the pre-sediment filter. It had turned brown and wrinkled after only 8 weeks of use. I replaced it with a different brand but left the carbon filter and membrane in place. After the system was flushed out I was happy to see my TDS numbers go down to the lower 30's and stay there! It's now been over 3 months and the TDS numbers are still good! I suspect the pre filter was the issue. The membrane and carbon filters seem to be working fine and they are the most expensive filters, so I will raise my star rating slightly.
A**N
Not Sufficient
I received the product quickly and installed it without difficulty. The size was correct for my AC-30. I did everything as instructed and my water tds reading is much higher than the recommended goal amount! It’s over 100ppm!
L**E
Water Filtration complete set
replacement of filters simple and easy. reasonable price
Trustpilot
2 months ago
2 months ago