Phanteks (PH-F120SK_DRGB_PWM_3P) SK120 DRGB PWM Fan 3Pack, 3X 120mm Fan, high Airflow Nine-Blade Design, DRGB Lighting, Rubber dampening washers - Black

The media could not be loaded. Recently purchased a Phanteks P500A, which comes with 3 x 140mm front RGB fans. I purchased these fans to match the ones on the front and so that all the RGB could be controlled by the case itself. The fans arrived without any damage and came with extra splitter cables to ensure an easy installation. Daisy chaining them to the rest of the case fans was easy and made it an overall easy experience. All 3 of the 120mm fans I purchase are being used as an exhaust and have proven to keep thermals as good as they should be. Noise level may be a bit higher than some of the higher end fans geared towards low noise level, but it is not anything that should steer you away from these fans as I find the noise level negligible with any other noise or having headphones on. Beyond the noise these fans look great and can really change the look of a PC build. The price is hard to beat especially for the experience I have had with them over the past couple weeks, so if you are looking for RGB fans with great effects at a great price then these are the ones for you!

I'm using these in my personal Phanteks case simply because they're an excellent quality fan for reasonable money. Nothing fancy here compared to many of the very pricey new RGB fans available, but they are quiet, move air efficiently and have decent RGB lighting. As can be seen in the pictures there is no edge, ring, or side lighting, just the translucent fan blades. That said they look very nice in the right situation or case and do their job of moving air without much noise.

If your case already has Phanteks fans in the system, these can link right into your current RBG Daisy chain for a very simplified install. No hassle, got it right the first time. These fans easily sync with your motherboard's dynamic RGB, at least for the main manufacturers. Shipping was fast and components were in great shape. It also included two extra connectors for additional length. The loudest component is my system is my GPU cooler by far, these fansI purchased these as I already had 3 of the same fans for my intake, so added three as exhaust, two top over the motherboard and one on the rear directly behind the cpu cooler. I saw a small improvement in idle temp for my 10900kf which is air cooled, but the key is controlling the spikes. Adding the exhausts helped reduce how long the spikes lasted, getting that hot air out faster to replace it with cool air. Definitely aiding in stabilizing high performance(<60C at load, 4.9 all core simple OC).

Pros:The rubber mounts included are easy to install and provide decent noise reduction.The D-RGB lights are bright and transition between colors smoothly. Nothing like more expensive ARGB fans, but for the price these are amazing!The airflow is rather decent and quiet, and keeps my CPU cool (I use the fans on my air CPU cooler)The ability to daisy-chain the D-RGB products is great and easy.No strange noises or ARGB LED issues at the moment.It comes with an adapter to connect to a 3-pin ARGB motherboard header. Nice.Cons:No installation instructions. Luckily, it's relatively easy if you already understand how ARGB connections work, but some minor instruction would be nice for anyone not used to ARGB products.A note to anyone looking to buy this product:Phanteks calls their ARGB products D-RGB products. They mean the same thing.There are two types of RGB: 12V(4-pin)(RGB) and 5V(3-pin)(ARGB). Check your motherboard to see which pin type(s) it supports. If your motherboard doesn't support any RGB, Phanteks does offer D-RGB controllers. Whatever you do, DO NOT power RGB lights with both SATA and motherboard pin power. One or the other, NEVER both.Overall, I am content with how these fans work and am more than likely getting more to fill out my computer case. I would recommend these to anyone looking for not only inexpensive ARGB fans, but ALSO PWM fans, as both features at this price point make it an amazing deal for budget PC builders!I have not tested the ARGB via a motherboard connection, since I am using my case's integrated ARGB controller (also from Phanteks).

PSA: the RGB connection on these fans is three evenly spaced pins, rather than the 2 + 1 pin layout that was on my motherboard. I was able to get an adapter inexpensively, and I still have full control over the colors, brightness, and effects. I would still say these are a great value for 140mm rgb fans.All of the fans I received work as expected, and I don't find them to be noisy (at least, they are quieter than the stock fans that came with my case and/or CPU cooler, so I don't notice the sound on these).

I was in the market for some RGB case fans to complete my custom PC build and wanted something that was durable but not too pricey. These case fans were perfect and I read a lot of the past reviews before purchasing them so it made me a little worried when it came to linking everything together. Luckily there was ONE YouTube video that was able to show exactly how to daisy chain all the fans together and now it’s running beautifully. One of the main reasons I chose these fans was because my case came with 2 built in fans that were also from Phanteks (my case is the P360A) so I thought it would be best to go with the same ones again. The noise level is pretty quiet and when I have my earbuds on, I can’t even hear them running so that’s great. I’m just glad I was able to get some reasonably priced RGB fans without having to pay a lot since I was already spending a lot for my other parts :)

For the price you wont find a better fan with RBB. Though Phanteks doesn't have any software to manage the RGB you can do that easily with your MB software. The noise level to performance is top notch. If you are looking for some well made / value conscience / performance driven fans then these are for you. Have installed these fans now in 4 different builds and not had an issues with a single fan.I own a couple of the Phanteks T30 as well and have to say they are by far the best 120mm fans you can buy if you don't want RGB. The next would be the Artic P12 which I also highly recommend.