Rectifier Diode 5Pcs 70HFR120 5Pcs 70HF120 Spiral Rectifier Module Forward/Reverse Polarity Rectifier for Charging Batteries and Converter

I used these to replace blown out press in diodes (that are apparently not made anymore) in a battery charger that I received for free. Now it charges just like new. Only needed 2 but got a bag full for any future needs.

Good value for the price. Matched set.

I use this diode to create a voltage drop of about 0.5V to 1.1V both ways.The lithium battery bms doesn't allow charging over 14.7v, and cuts off the battery. The car charger doesn't know its charging a lithium battery, so it charges it at the full 14.7V.Using one forward, and one reverse diode in parallel on the positive terminal, I guarantee that the bms doesn't cut off, the battery gets charged at a lower voltage (not to 100% where longevity is affected).At the same time, the car I use is a hybrid, so the battery only provides up to 50 amps to the car. The diodes seem to handle it just fine. The charging current is between 5 and 15 amps. The car doesn't even realize the battery chemistry is changed, and it works flawless.

With a little modification I replaced the diodes in a chicago welder 180 and it works great

Kid at the parts house did not know what a generator was let alone the cutout relay. Anyway most cars prior to 1962 have a cutout relay to keep the battery from burning down the generator. The cutout relay provides this protection until it fails. Then you get to burn stuff up! Putting this diode in series or in place of the Cutout Relay prevents this problem from ever happening. Since it will be operating without a heatsink it is advisable to have a little extra capacity. These do the job nicely just be sure you get the polarity correct.

Used to retro fit hobart welder. Works perfect

Great and fast service arrived in super fast and quality looks great

quality product . would purchase again .

bought these to isolate two batteries from one another yet allow both to put out current..... they worked great as diodes and high enough current rating to not even get warm...

Muy bueno y funcional producto

Exacto a descripción, falta probarlos

Une soudeuse

Seemed to work well to repair a Nascar 200A battery charger. The only rectifiers were blown. Installed 2 of these with new wiring and no problems since.