Mount Plus 1153T LCD Tilt Wall Mount for Pioneer Kuro 50" 60" Plasma tv PRO-151FD PRO-111FD PRO-141FD PRO-101FD PDP-6020FD

Supporting a latge 60” Pioneer Plasma of 135# with no issues. Install straight forward.

It worked out fineRelatively easy to installIt's supporting the tv weight wellAlthough I had to use longer and thicker bolts

Package was broken and was taped all over. It was missing few screws. I have found some in a home and make best of it.

Both are designed to span three studs, but the 1152T is an adjustable-width, three-piece mount. The 1153T is a non-adjustable, two-piece mount. The way the studs lined up in my installation, the three-piece would have worked better. But the bottom line is, I should have received what I ordered or been told up front they would be substituting a different mount.

I purchased this for a large and very heavy flat panel TV. I was already aware before purchasing this product one of my mounting studs would be dead-center of this mount with 2 more usable mounting studs 16” OC to each side of the mounting bracket giving me the ability to place the 6 mounting lag bolt screws into building structure for proper support as described in the product’s description. Problem is the mount I received isn’t the one pictured and is very different. I ordered the 1152T mount shown and described in the description as of 5/10/2019 but received a very structurally different 2 piece mount with 2 small connecting joints that is model number 1153T according to the instructions provided. The 1153T is two pieces, not 3 as shown in the products description. The two pieces are seamed together at the center of the mounting bracket with upper and lower connecting joints with much lessor small bolts and nuts that do not penetrate the wall or stud, nor can they be made to do so as the offset is too great. There are no mounting holes available to utilize my middle wall stud for support. The first mounting holes are nearly three inches to each side of the middle seam once attached together. In my application I have no option of movement to offset the mount on my studs. Doing so would greatly offset the TV on the wall as it would in most homes with this mount.It is frustrating to receive, much less recommend a product when you don’t receive the product pictured. I simply can’t give a product that isn’t what I ordered a good rating and that goes double when I must modify the product to make it work as described in the product description. If you’re selling a product on any online venue the description and product photo should be exactly what the customer receives. I paid $99 for this premium quality mount which is expensive for a flat panel wall mount so the correct model number, description and accurate product photo shouldn’t be too much to ask. I would NOT recommend purchasing from Mount World and I would NOT recommend this expensive mount unless you don’t mind potentially modifying the product to work as intended and support a large and heavy flat panel TV. It is heavy duty in material if that is your objective but that means nothing if you sacrifice it’s mounting into structural studs not being able to utilize all three studs it covers on your wall. Drywall mounts are provided but I wouldn’t recommend trusting your drywall to hold a heavy expensive TV.

Two piece, as shown. Yes, this may affect where you can place screws in your studs. I was able to move my placement left or right to hit my studs. Also, the TV hanger can move several inches left or right on the wall bracket. With a 60 plasma, the left/right movement must be only a little so as to not place undo stress on the wall bracket.

Mounting went well but the tilt feature is a bit out dated. Not so easy to tilt it back as with the newer models.

Plain and simple, the mount works and was easy to install. This is the 3rd time I have ordered a similar "cheap mount" from Amazon and they are just as good as some $200 mount at Best Buy.