VEVORDriveway Drag 66" Width, Tow Behind Drag Harrow 35" Length, 4" Height, Driveway Tractor Harrow with 2 Adjustable Bars, Heavy Duty Steel, Driveway Grader for ATV, UTV, Garden Lawn Tractors

Easy assembly and worked well on our driveway. After winter our driveway takes a beating from snowplows. To have someone come in dress your stone driveway, usually cost $75 bucks and waiting for them to show up. Now with this drag and my small tractor, I'm ready to dress my driveway when it needs some TLC. No more pot holes, or muddy spots. This drag worked great.

I bought this drag to smooth our gravel driveway. I recently put down five yards of new gravel on an existing driveway that required some building up. I purchased three solid cider blocks from Home Depot before using it because I thought the drag would need the weight to work efficiently. I found that the drag dug in way too much and I removed one block at a time and ending up removing all three. The biggest issue I have is with not being able to lift the drag up when making a sharp turn at the ends of the driveway. I have to physically remove the drag and reposition it each time I reach the end. I am pulling the drag with a Cub Cadet lawn tractor, which is more than capable. I am still thinking of ways to easily lift, or transport, the drag with having to get off my tractor each time and physically reposition the unit. It does do a good job though leveling the gravel out and filling in the dips. All of the hardware was included and was very easy to assemble.

I am so impressed at how quick it leveled my driveway. We just cleaned up after hurricane Helene and it had washed massive ruts through and across our 450ft driveway. After only about half a dozen passes with 2 cinder blocks sitting on this drag and my drive looks better than it has for about 8 years. The design is perfect. It lays flat and it stays flat! I only wish I had a hydraulic lift so that I could turn around at the end of my drive without having to disconnect it or in this case, I attached ratchet straps and held it high enough to get turned around. I drug it behind my four wheeler. It worked like a charm!

Before I ordered it I read some of the reviews and the biggest complaint was that the instructions were not informative enough , I can’t tell you enough that it is very easy to put together. I looked at the picture 2 times and had it put together in 20 minutes

Product is extremely difficult to assemble due to poor - non existent instructions. To be precise, only one page of poorly printed black -white paper worth instructions. The metal and paint quality appears to be good, though the full results would only be know after use in the field for at least a year or so. The "Adjustable Bars" the product claims as their edge over their competitors, cannot be used as described on the amazon product webpage. Quite a few of other reviews also will attest to this fact. The "Adjustable Bars", are useless without the a fore mentioned anchoring hardware and modifications. I foud that, it needed four angle brackets and 8 bolts, 8 flat washers, 8 spring/split washers & 8 nuts as hardware. Also, 8 holes need to be drilled with two each on each of the two "Adjustable bar" and two each on each the two "Long Bar".. All of this hardware and holes should have been included with the product, but is not. After buying the missing hardware and making the above mentioned modifications myself, my Drag Harrow will now work as described in the product page descriptions. Vevor CS has replied to some reviews posted from the past, to contact them. I did contact Vevor CS. However, my experience is as follows. Deceptive product description. Extremely poor customer service. Vevor CS resorts to gas-lighting customers.

Shipping was fantastic, came very quickly. Material seems to be ok quality. The main reason for only 3 stars is the lack of instructions, and what little instructions (a photo only) was for a different model so it did not match up to the one I got.I would say that if the photo was better and some instructions it should have only taken 15 minutes or less to assemble, But with the miss leading instructions it probably took at least 45 minutes or so.There was no instructions for how the reinforcement bars for the middle to hold extra weight. The bars really did not fit at all. I had to bend the tabs on the end and then drill holes and find some bolts to secure the reinforcement bars.After it was assembled it worked ok for a drag. I am preparing my ground for a lawn. I rototilled the ground then tried to smooth it out. This drag is not very well designed if you have any type of debris (i.e. weed/grass) clumps it clogs up and then dumps it in piles and makes trenches in the dirt.

I must say I was somewhat skeptical before purchasing this product but the price was too good compared to alternative grading options. Assembly was fairly easy and it does come with trailer pins. The item is pretty heavy and feels solid. The Chinese welds aren’t the prettiest but don’t seem like they will fail. Two cinder blocks fit perfectly in the center for some added weight. I have about 1000 feet of gravel driveway and 4-5 passes did a pretty good job. I towed this behind my zero turn with no issues. Probably not an option for commercial use, but for the homeowner to use 1-2 times a year this is a great affordable option.

This is definitly a sturdy piece of equipment and went together easily enough though the directions are minimal. However it was missing several bolts and nuts and the pins to connect the shaft to the drag and to the ATV. Will go to the hardare store and buy them today.