AmeriLite For 2001-2011 Ford Ranger Led, Halogen, Tube Replacement Pickup Truck Headlights with Corner Lamp Set - Passenger and Driver Side, Vehicle Light Assembly, Black

The lights came in simple packaging, had the exact plugs needed and works with the quick release latches for the lights on an 07 Ford ranger. Very bright and look like current models.

One piece unit makes this much easier to install or work on. Built in LED board powers your rub lights, but your headlight bulb will need replaced and turn bulb. Bright easy to install and aswell as the height adjustments are pretty straight forward. Would recommend 100 times over

UPDATE:For anyone complaining about the adjustment of the headlights (aiming down), there is a small screw on the back side of the assembly that will tilt the bulb up or down. There are no markings or instructions indicating this, so it's not obvious, and the adjustment can only be done with the assembly removed (real pain), but it IS adjustable. I was not able to get a hold of the manufacturer, but after messing around with it was able to figure it out. I've updated my review to 4 stars (see original 1 star review below).Also, after proper aiming, the headlights are sufficient for night driving, but the bulbs that come with the unit are less than desirable, and I still recommend upgrading them to LED's in order to get proper brightness for safe night driving.ORIGINAL REVIEW:These lights look great, and fit my '02 Ranger Edge really well. BUT... the adjustment of the headlights is terrible. You can tilt them by adjusting the mounting screw depth, but it's minimal and not enough to aim the headlights up to a proper height. They aim down at the ground and won't light up a road sign that is 20' in front of the truck. I've tried contacting AmeriLite for assistance, but their online contact form does not work, and I'm hoping to reach them by phone once they open (it's the weekend...). If I can get the issue resolved, I will update this and gladly give a better review, as the headlights do fit well, look really nice with the truck, and function exactly as intended with minor installation issues (see comments below).Another note; the standard bulb that comes with it is not great (as far as I can tell due to the aiming issue). These should really come with an LED bulb for the main headlight in order to make it a perfect turn-key assembly.When installing, I had to re-use my old turn signal socket, as the ones that came with the unit do not work with my trucks plug for that bulb (my truck is stock), but it was easy to switch them out and only required a tiny bit of trimming to get the old socket to click into the new housing. Other than that, it was a straight forward and easy install. Aside from the aiming issue, I would rate these as a 5/5, but until that is resolved, it's not going above 1 star... headlights should function as headlights, not just look cool!

High quality headlight assemblies. These went in easy. Adjustments are with a Phillips screwdriver. They come with bulbs already inside. Word of advice, don’t unscrew the running light bulbs because the LED could come out and you’ll struggle getting it back in with the length of wire.

Totally satisfied, easy install, nice looking

Update 1 month later: Driver side LED DRLs no longer work. Checking with meter, they are getting power, just not working. Tested with previous headlight assembly and they work fine, ruling out any issues with my truck. Disappointed, as I really liked these.Works, but outside top posts are about 3mm too short. Both sides require a pry bar to push the top of the lights in far enough for the latches to engage. Once you know this, and have a long enough flat head to utilize as a prybar, they install fine.They also point straight down at first. So much so that you can't even tell they are on from inside the truck. They will adjust up into place however, having to take them back out, repeatedly, to reach the adjustment screw, combined with the top outer posts being too short complicating the install process... This becomes a serious pain. Once they're adjusted, however, they work just fine.Included bulbs are hot garbage. Dimmer than the cheapest AutoZone bulbs I've ever used. I replaced them right off with LED bulbs. The rubber boot will need to be altered for almost all LED bulbs.The LED DRLs and side marker lights are bright and vibrant. They look great.All in all, once halogen bulbs are replaced with something better; Once you figure out how to install with the posts that are too short; Once you've repeatedly taken them off/on to reach the hidden adjustment screw to move them from pointing straight down to the correct adjustments; And once you've altered the rubber boot to fit an LED bulb... these look great and aren't half bad.

Only issue I had with these headlights was that 1 of the 3 tab was too short on both housing and the simplest way to fix the problem was going to my local part store and get a box of small washers and longer screws other than that I swapped over my Auxito LED bulbs (cut off line is very good) and as well as putting in Auxito amber bulbs

Really easy to install. There is one connector that gets in the way, but it's fine.LED is super bright, That's the far away picture.There's Phillips screws to adjust the lights.My only complaint is the LEDs don't come on with start of the car. Even though I have daytime running lights.