Kids Ride On Car 12V DIY Modified Harness Complete Set of Remote Control Circuit Borad Wires Switch Gearbox with Motors, Children Electric Ride On Car Accessories

I had found a Mercedes SL400 power wheel on the curb in my neighborhood. I been looking to buy one but people in my area wanted to much for a used one. Found it, did some RESEARCH. Before buying anything and this was exactly what I needed. I even bought the correct gears for the other motor as the car only came with 1 motor. I do have experience with low voltage items and how controllers boards work as I wire them on a daily basis. Set up was easy to understand even though it didn’t have instruction. HIGHLY RECOMMEND CONTROLLER BOARD OR LOW VOLTAGE EXPERIENCE!! In order to understand it all and how it works. Did a lot of small but major mods to the vehicle. But in the end it all came out looking just as when I picked it up. The only visible changes are the power button and the shifter that’s on the dash.

The board is short-circuited. When connected to a 12V battery, smoke came out of the board and the board does not respond. It only turns off and on and so on.

Well, the reviews are 100% correct. I bought this as I'm trying to convert my Power Wheel to have a remote control as my daughter isn't old enough to drive it. With that being said, I'm not sure where to start. The biggest issue is the lack of a wiring diagram. I feel as if that would help tremendously. Apart from that, the product is as is, there are no extra parts or connectors, which should be included as I'm planning on using a lot of the stock wires that came with the truck, so some adaptors would be nice. That is another purchase I'm making on Amazon. It's quite confusing to try to figure out where the stock wires get hooked up to the control box. Again, detailed instructions as to how to do this would be extremely helpful. Lastly, it appears as the wires for the motors are missing, or did you expect me to unsolder them, and solder them to the new control box? But, after purchasing a wire connector kit to hopefully get the connectors that are needed to use the stock wiring, it can be used.

The media could not be loaded. Found an old audi ride on toy on the side of the road. Figured I'd give it new life and replace the wiring harness and motors. Works prefect! Great kit.

Perfect parts to fix kids ride on car. Works great now.

The media could not be loaded. I didn't use this exactly as intended, but it worked well for converting my nieces wimpy 6v ride on into a 12v RC that can actually drive through wet grass.However the included spade connectors didn't seat very well on the motors, but that was resolved rather easily, I soldered the motor pigtail to the motors. An added plus though is that it does provide a switch 12v plug for additional accessories (lights, sounds, etc). If using it for a 6v conversation as I did, pair this output with a 5vdc regulator and all of the original accessories should work just fine.

Hooked everything up just to get nothing. I have 14v charging to the battery and 12.7v on the battery when not charging but have no power to the motors or the pedal or even the power button itself. No instructions at all and after all that. It doesn’t work.

This was somewhat the kit that I needed. Was a little disappointed that the shifter was not the “normal” connector but rather some type of circuit board connector. And the right wheel seems to be failing already. I don’t know if it’s the motor or the 12v module which is failing, but something is failing. The whining noise from the module is annoying too. Takes a long time to get up to full speed and the L gear on the shifter is no different than the H gear as well. I don’t fully regret the purchase, but wish the quality was a little better. Will be pulling this out and upgrading again to an 18v battery upgrade when my son is older