Sew Ready Eclipse Hobby Sewing Center Craft Table Sturdy Computer Desk with Drawers in Black/White, 13362

I have been using a smaller "Gidget" table for several years. It worked for my small sewing machine but my new/larger machine does not fit in the drop-down trayI spent hours looking at tables and reading reviews before selecting this oneThis has lots of great features (see below) but I wanted a drop-down tray large enough for my machine.Order placed December 31; scheduled for January 8 delivery (Holiday and 2 weekends in between)Very pleased that it arrived earlier than scheduled, arriving on January 6Saw comments either about this table (or others I considered) stating the table top was damaged upon arrivalMine arrived in excellent conditionOnly a couple of dimples on one end - does not appear to be from packaging and will not affect the functionality of the tableAll screws, parts, Allen wrench and hex wrench includedAll screws and parts properly labeledAll holes were properly placed and drilledIf you use the Allen wrench, it will take a long time to assembleThe Allen wrench is short and some of the screws are placed so the wrench needs to be repositioned frequentlyMy husband used an Allen drill bit for his drill, along with a flexible extension, which made assembly much fasterYou will also need a Phillips screwdriver, which is not includedDirections are not listed in numerical orderIf you follow each page as shown, the table goes together very wellWhen attached, the shelf support did not pop into the plastic bracketThis was corrected by loosening the hinge, positioning the shelf support then re-tightening the hingesI will probably keep the shelf up most of the timeMy sewing machine (Singer Modern Quilter) measures approximately 22" x 9.5"The drop-down tray measures 23" x 10.75"The power cord and foot pedal cord connect on the right side of my machineThe larger extension table will not fit on the machine with the drop-down tray loweredI have a small accessory tray that came with my machineThe machine is very snug side to side with the cords connected and the accessory tray attachedIn fact, we fed the power cord through the bracket on the side of the drop-down trayIf you plan to use the free arm on a regular basis, lowering and raising the drop-down tray will be inconvenient, especially if your machine is heavyIn my opinion, it is best to remove any size sewing machine before adjusting the tray positionThis table has a generous work area and total dimensions of the table are:Entire table top measures 60" wide x 23 1/2" deep x 29" highThe drop-down tray drops 3"My machine measures 3.75"My machine does not sit flush with the table top even with the drop-down tray in the lowest positionThis may or may not be an issue for youIt is not an issue for me, as the accessory tray has a rounded edgeThe left side of the table measurements are as follows:Table top with leaf down - approximately 6" wideLeaf - approximately 9 3/8" wideTop left with leaf up - approximately 15 1/2"The right side of the table measurements are as follows:Table top - approximately 21 1/2" wideCloth drawers - 13" wide x 3 1/2" deep (three drawers total)The cloth drawers are a thin canvas-type fabric, black in colorEach one has a large grommet-style openingThe drawers sit on a trackThere is a bottom insert for each drawerThe bottom inserts are made from cardboard with the canvas-type fabric on the topI would not put extremely heavy items in the drawersThe drawers offer ample space for a variety of sewing suppliesThe drawers do not have dividers; however, you could add small plastic trays if neededThere is a metal shelf beneath the tableThe shelf measures approximately 32" wide x 7" deepAlthough I have not yet used the machine with this new table, my shins do not hit the shelf when sitting at the tableI'm not sure what, if anything, I might use the shelf for on a regular basisThe shelf would be a handy place to put the foot pedal when vacuuming under the tableDepending on the height of your chair or bench, be careful not to hit your knee on the platform bar, which is attached to the drop-down tray, as you get up and downThe table has 6 levelersI am using this on a carpeted floor and may not need to adjust the levelersI have not tried sliding the table with the machine in place and it's probably best/safest not toThe table slides very easily on my carpet with no sewing machine or suppliesThe table top and drop-down tray are white and approximately 5/8" deepThe table top seems to be Formica and has a bit of a texture to itIt would be nice to have a larger work area to the left of the machineIf you are right handed, the large area to the right is great if you need to write while seated (I am left handed)There is sufficient table surface for sewing supplies and/or a lamp to the right of the machineHaving just set it up this evening, I am very pleased with the size, color and functionality of this table. Hope all of this information is helpful; please ask questions and I will answer as best I can.

Bought for my wife as birthday present. She loves it and me! Easy to construct.

Perfect home for my machine, very sturdy nd very stable, not much vibrations. Works perfect for my space!

Looks great

Nice table very stable. The only issue was that some screws needed to be self tapped into plastic grommets in the wood. It was hard to do with the allen wrench that was provided. Scraped some hand bar soap on the screws and it made it a lot easier to do. Be careful not to screw bolts to far that they strip out of the grommet. Snug tight is good enough.

Good quality, Nice table especially for the price is worth the buy

My grandson loved it

I'll start with the positives then move on to the negatives.Pros:The parts are very well marked and the instructions are crystal clear and easy to follow.Cons:1. The packaging is poor - the parts move around in the box under transport and four parts were damages upon arrival. Pics attached2. The leveling feet do not screw in on the level - and some of the holes have "bumps" that act as stoppers and some do not - so the feet themselves would not be level even if the screwed in correctly.3. I spent two hours putting this together on my own and when I got to one of the last steps - installing the adjustable sewing shelf - found that it is not level. I checked my installation and it is correct. The parts are manufactured unevenly. Pic attached4. I called customer service after I opened the box and left a VM as the person's message said they were temporarily away form their desk. It's four hours later and no return call yet.5. When I discovered the shelf would not level I decided to try their website as per their instructions to see if that might get a faster response. Typing in their web address yields a "site is no longer available" message.I'll edit this post if things change for the better - but so far I would suggest steering clear of this product.Dreading having to deconstruct the whole thing, pack it and ship it...