🚀 Elevate Your Ride with Goodyear's Shatterproof Deflectors!
The Goodyear Shatterproof in-Channel Window Deflectors are designed specifically for the Ford Ranger 2019-2023 SuperCrew, providing superior rain protection and a sleek aesthetic. Made from high-quality, durable materials, these deflectors ensure a perfect fit and long-lasting performance, enhancing both the comfort and value of your vehicle.
Color | Premium Smoke |
Brand | Goodyear |
Exterior Finish | Premium Smoke |
Style | Sun Sleeves |
Auto Part Position | Rear |
Number of Pieces | 4 |
Installation Type | Window |
Manufacturer | LLC FCRS START |
UPC | 850031795341 |
Item Weight | 3.15 pounds |
Product Dimensions | 41.93 x 12.09 x 1.77 inches |
Item model number | GY003449LP |
Manufacturer Part Number | GY003449LP |
C**L
Inpressed
So easy to work with and install in minutes, after prep first!! Very flexible as stated and perfect fit!! Look classy!!! My brother is ordering a pair cause he likes them so much!!! I highly recommend these!!
G**.
Perfect Fit
Installation is as easy as the videos make it look. Just follow directions and leave your windows closed for 72 hours like you are supposed to. They make my truck look slick and no more rain in my face. 👍
D**K
Weak tape
The tape is not very strong had two of the visors fall out already
W**E
Fit 2017 Escape Perfectly
Easy to install. One little problem with the product itself though… One of the back window deflectors came loose after six months and would not stay in place. Apparently the adhesive tape lost its sticky. Notified the seller (Spark Lines, Inc.) and within a week they sent me an entire new set, free. All good now!
M**Y
2020 F-150 side window deflectors,drip edge
Fit and work great,well made and work good,fast shipping,5 stars!
S**M
Waste of hard earned money! Do not buy!
I have reapplied all of the rain guards at least three times. I followed all instructions and kept my windows rolled up for the amount of time called for. The two rear guards have a sharp corner that hits the edge of the window and you can only roll the windows up if you have some one stand outside and hold the guard away from the window while you push the button. The front ones seemed ok at first, but on hot days the adhesive melts/loosens and allows the guards to drop down a little which makes the windows impossible to roll up all the way. I just took all 4 of them off to throw away as I no longer have the packaging and can’t return. Don’t waste your money like I did.
B**5
Keeps Inside of Truck Cooler - Allows for Ventilation
I've always put these on my vehicles. It just makes good sense. They keep the inside of the vehicle cooler in the sun and allows for adequate ventilation while driving in rainy weather. They are stylish and good looking. Installation is a bit time-consuming to get it right. The instructions are clear, and if properly followed, the end result is perfect.
C**3
Adhesive Not Great
Bought this about a year ago for 2011 Silverado crew cab LT, installed in Sept. when temps in VA are optimal. By Nov. one of the rear pieces had a gap where it was coming off or falling down. Now I understood the purpose off these metal clips better. They were just for the back windows, apparently without them, the visor will begin to sag & fall off. Since temps. were too cold at this point to do anything about, just hoped it would stay on & those clips would help keep it pushed up. Since no one was rolling down any back windows in the winter, it managed to stay on, however it is not a daily driver, doesnt leave the house much during the age of covid & when it does, doesn't go far or up to highway speeds. When spring came around, I kept hitting the wrong button to roll down my front windows & off it went, thankfully landing in a yellow striped median on a 4 lane rd. where I was able to cautious retrieve it. It was in 1 piece but permanently scuffed in 2 places. By spring the other side had started to separate so I went to take that side off as well, which practically fell off once I removed the clips. The problem seems to be that the adhesive is too thin for the back windows, like paper thin, I didn't think it was that great on initial install but gave it the benefit of doubt. My truck was used so possibly the owner before me had some other brand in, that made that channel bigger than factory but given that these came with clips that are supposed to support the vent shade from sliding down, I think the flaw is the adhesive & probably know since the clips are a must for my truck. The front pair is still holding up well, probably because part of it gets tucked into the window & is sturdier. Maybe the company would have sent me more adhesive strips or preferably new back deflectors but once I took them off, I had more important things to attend to in life & forgot about them over the spring & summer since my spouse primarily drives the truck. I think a thicker 3M outdoor tape will work better but haven't tried it yet. Even if it does work, 1 deflector will look bad since it is scuffed up which is super annoying to perfectionists, I may just not use them in the back, haven't decided yet. I feel the AVS brand vent shades is a lot better. Had some on my Grand Prix's & they lasted about a decade & were not in-channel & depended entirely on the 3M adhesive! I would advise Goodyear & anyone else to use a better adhesive strip if you think there is too big of a gap when doing the 'dry' install. The necessity of the clips is very telling about the known probability of the back deflectors flying off is all I'm saying, do take precaution.
M**A
Easy install
Easy install and look nice , just put them on ,now I just have to wait the 72 hours before rolling them down , never had the issues some people are saying about the windows not rolling up properly, gotta imagine they didn’t install them properly cause I never had that issue once , as for the adhesive I would have liked to have seen more on them but I didn’t have any issues with them sticking either , so far the adhesive is okay but if you keep having to take them off cause you didn’t install them right the first couple times I could see the glue wearing down and having an issue . As for the one review where someone is talking about the back window not rolling up unless you have someone pulling from the outside ,that doesn’t quite add up ? Why wouldn’t you have the door open pushing the button with one hand and pulling with the other hand to make sure there’s clearance? As it states in the instructions? Just thought I’d bring that one review to light so it doesn’t sway to many people from purchasing these , that doesn’t seem like the brightest person but I will update my review if I end up having problems with the adhesive after 72 hours
A**X
Great product
They fit in nice to my 2009 gmc sierra super easy to install
K**B
2020 f150 crew cab
Fits 2020 f150 crew cab/half doors, easy install and they don't stick out to far being in channel looks great and works as they should. No whisleing noise at Highway speeds very sturdy.
T**Y
These work like a charm
I purchased these for my 2017 ford escape and purchased another brand for my husbands hyndia because we couldn't find his in this brand.Mine were so easy to put in, the look great and they are still in place after 2 months. Love these ❤️
T**
super
The media could not be loaded. super le fun quand qui mouille peut basser les vitre un peu
Trustpilot
2 days ago
1 month ago