🚗 Elevate Your Ride: Power, Performance, and Prestige Await!
The K&N Cold Air Intake Kit is designed for 2016-2019 Toyota Tacoma models with a 3.5L V6 engine, promising an increase of up to 19 horsepower and 13.05 ft.lbs of torque. This kit features a reusable air filter, a durable aluminum intake tube, and a custom heat shield, ensuring optimal airflow and engine protection. Installation is straightforward, taking less than 60 minutes with basic tools, and it comes with a no-hassle lifetime warranty.
Brand | K&N |
Product Dimensions | 18.27"L x 18.27"W x 12.52"H |
OEM Part Number | 77-9039KP |
Global Trade Identification Number | 00024844363596 |
Shape | Oblong |
Manufacturer | K&N Engineering |
UPC | 024844363596 |
Model | K&N 77-9039KP Performance Intake Kit |
Item Weight | 11.4 pounds |
Item model number | 77-9039KP |
Exterior | Machined |
Manufacturer Part Number | 77-9039KP |
A**R
Wow, I underestimated this product
First, I'm not a mechanic, and you do not need to be to install this item. It's very simple and the instructions are detailed enough to get through it. Prior to ordering I was he'd several YouTube videos, and as I suspected while researching exhaust upgrades, the audio of these videos do not truly represent the tones IRL. After installing in about an hour, my first drive was quite impressive. The most prominent improvement is the increase in a beautiful throaty tone under load, but not when cruising. It looks great also. I do not have a dyno so I'm not prepared to comment on the amount of gains, but it's noticeable. I highly recommend this for the intermediate installer and K&N products always deliver premium quality.
A**R
Improved MPG
Better gas mileage, and nice engine growl.
G**S
Great Performance
Thankfully I did not take apart the old system before I did a parts inventory. Very important vent tube coupler MISSING. Call K&N and they are shipping but messed up my day.DO A PARTS INVENTORY FIRST!That said, got the part in two days, install was easy. Results are good.UPDATE:First road trip, Las Vegas to Montana. Absolutely a 10% increase in gas mileage. Peddle lag, GONE. Can't prove horsepower increase, but I would bet on it.
T**S
Better throttle response
This is the third k&n intake ive installed and this one was a bit more interesting than the rest....as its the only one i broke during installation. Here are my pros and cons of it.Pros:1. Better throttle response. Maybe more power but you're not gonna be blown away by any difference lol.2. Seems to be smoother taking off and accelerating3. Sounds amazing. Its subtle under normal driving but plant your foot and it gets loud. I feel its only truly loud over 4k rpm. If you have any experience with intakes on cars, you would most likely agree this one is mild.4. Ill update after some miles on this one but after just the initial test drive, im pretty sure gas mileage will be better.5. K&n provided awesome technical help and even replaced parts that were broken during installation free of charge (see the cons for details)6. Everything is fully backed by them and they even gurantee if a factory warranty claim is denied as a result of this intake, they will cover it.Cons:1. The instructions are detailed and feature pictures from an actual toyota tacoma like mine. (Much like every other k&n intake ive installed) however they seem to lack details on some parts and could have been much clearer on some aspects of installation. It seems they put alot of effort into the directions and they are good but some things needed to be further detailed.2. While tightening the breather tube fitment down it snapped off (see the picture)....why was this not already made on the tube anyway? It seems pointless to have to screw that in. Regardless be extremely careful when putting it together. ***(It should be noted that k&n sent me a replacement fitment and intake tube completely free of charge after i called them)***3. Lots of bolts and washers that look extremely similar and the instructions do a horrible job of differentiating what goes where. Its easy to figure out but i do feel they could have streamlined the screws and such that they used.In closing, id say that i reccomend this for your tacoma if you want better throttle response, a deep growling engine sound and overall better drivability. I would strongly advise reading the directions for each step and be extremely careful during install. Do not over tighten anything!
L**E
Worth every penny!
Wow! I’ve run many K&N systems over the years from ATV filters to full intake kits on GM small blocks... and they have never disappointed! This kit was installed on a 2020 Tacoma with a 3.5L V6. The kits are pretty self explanatory, but when you have a question, the directions are clear enough to provide an answer. Kit was installed in about an hour with little trouble. I did mix-match a couple screws and have to swap them around but that was it. Fit is tight and secure, and the design and finish are amazing! Sound is amazing as well when reaching into the power band. Nice deep tone that you wouldn’t expect from a V6. There is little to no noise while cruising at highway speed. I can’t answer as to positive MPG yet bc I haven’t racked up enough miles to make that determination. I would highly recommend this kit for anyone wishing to wake-up their engine. These kits are made for almost any application. Just check K&N’s website for your part number.
C**B
Came missing parts, sent me wrong parts twice
I’ve had this item for a month now put together missing one part, contacted k&n told them ny situation they shipped out a new part for me few days later, wrong part, a part that doesn’t even belong to this cold air Intake called back spoke to somebody else they put the order in told me it’s a new part now mailed it got it today it’s the right size but too long doesn’t fit….. I’m done with this item I want me money back. I didn’t pay $360 for something to sit on my counter for a month because the manufacturer can’t get it together. They’ve had 3 tries now.
D**.
Very good quality
Construction is solid and it looks fantastic in the engine bay. My only gripe is it is very loud, but if that is not an issue for you than I say get it.
C**D
K&N Cold Air Intake is a Great Product.
Installed my new K&N Cold Air Intake Kit on my 2019 Tacoma TRD Pro. Easy install, took about an hour.Improved performance just as advertised. You can really hear the suction of the cold air intake during full throttle acceleration. I like this but some may not. Just helps your engine run more efficiently. Dynoed 17 HP Increase.Win Win
B**
Fácil de instalar y un gran cambio .
Solo tengan cuidado con la rosca de plástico en caso de que pidan el tubo en plástico, nomás enrisquen hasta donde se ponga duro , si no lo barren
D**L
Très fiable
S'adapte très bien au véhicule facile à installer
S**A
I can feel it
instal was a bit tricky on 2023 tacoma. instruction paper is horible. but it works. sounds awesome. and the kick during accelration is def noticeable
R**N
Great upgrade for my 2017 Tacoma
This was very easy to install, took me about 1 1/2 hours. Polished aluminum looks awesome. Great sound, coupled with my MBRP exhaust.Very healthy and happy 3.5L V6. More air in and more exhaust out translates into better performance, more torque, more HP, better fuel economy. Reasonably priced.
R**S
K&N garantia de producto
Excelente producto llego completo y en paquetes cerrados.
Trustpilot
5 days ago
2 weeks ago