Skelang Red Oak 3/4" x 50' Roll Wood Veneer Edge Banding Preglued Iron-On with Hot Melt Adhesive Edgebanding Flexible Wood Tape

I used a heat gun to apply, and the glue works great. It melts fast, adheres quickly, and is able to be repositioned with just a bit of heat. The edge banding itself would've been great, but it wasn't cut straight. When layed down flat against a straight edge, the banding curves about 1/2 - 1 inch over 3 feet. Only the first half of the roll had this problem, so maybe I just got a bad roll. The thickness is consistent with other brands. Overall, a decent product, but be prepared to cut multiple pieces to get a straight one

I have been making wooden furniture for 50 years. The edge banding I have used in the past to edge band 3/4 plywood is 7/8" wide. You have to trim/sand the overhang.......but it's easy to line up. This product is just like is advertised....3/4". No overhang. If you bought one of those cute trim tools to trim up the overhang........you can put it on the shelf with all the other tools you thought you needed.....you won't be using it.This is good edge banding with good glue at a very good price. I had good luck by using some of that blue painter's masking tape and taping the band up to the surface before applying the iron set to cotton. Worked good for me. Good luck to all.

I was somewhat disappointed with this wood veneer strip for a couple of reasons. First, I ordered one roll (50ft) and while it was rolled into one roll, the strip was obviously two pieces that had been attached to achieve the 50ft length. This left an uneven overlap of the veneer that required either applying as is and having an obvious overlap/uneven bulge area or cutting it and piecing the edges together creating an obvious start/stop line. Secondly, as I unwound the veneer coil (particularly toward the interior portion of the coil where it was more tightly wound), several places splintered and broke rendering those sections unusable.The positives for this product: the color was uniform and exactly as pictured and there was plenty of adhesive preapplied.

I have use edge banding for years and this problem I had was a first. Glue worked perfect edging stayed put once heated but I continually had to start over because about 25 % or more of the roll were shorter prices overlapped and glued together. That meant of course pulling off the shorter strip and starting over or slicing the strip and having a seam right in the middle of my wood. It was not one continuous strip. I liked the product but this was deceiving. I would not recommend this product.

I think the product has a good quality, but it is not so easy to adhere to the material. I used plywood. Just heating with the iron wasn’t enough to adhere. I had to pass the iron to melt the glue and then use a wooden piece to make pressure against the plywood. To finish it I used a utility knife and sanded it. I would buy it again, I think it is worth the price.

Sticks well, might need a tough up here and there, although I was doing this outdoors in Florida. Suspect it’s best to do in the shade, cooler area. I think the heat made the adhesive come loose.Stained really well matching the rest of the wood.

Worked perfect. Looks great however it’s not exactly 2” wide. For most projects it wouldn’t matter but for this one I wanted to split it up the middle and didn’t have enough.

Great quality, very hard adhesive even after staining, no peeling or buckling. Highly recommend!

As advertised, I recommend

Superb quality, minium joints,presanded, highly recommend

just as described. went on with no trouble. easy to use