NavePoint6U Server Rack Enclosure with Glass Door, Cooling Fan, Locks, & Removable Side Panels - 6U Wall Mount Network Cabinet 19 Inch Rack 17.7 Inches Deep

Does it's job well. Fairly easy to assemble and provides adequate security for the cost. Ventilation is very good. Recommended. Not tremendously well-built, but again, very good for a budget minded rack.

This cabinet has a lot of bang for the buck. It was easy to assemble, mounted well, and seems to be of good quality. It came with one fan, I order a second fan along with an extra shelf and additional hardware to screw the shelves in. Unlike it, it locks, is of a good size and I would buy it again.

We buy a lot of these for customers use/holding computers and hardware in indoor/outdoor setting. The locks are sometimes difficult to lock, and set up is somewhat cumbersome and takes some time with styrofoam pieces floating all over. Once all put together is fairly sturdy and not any viable alternatives for computer and equipment storage. Fairly expensive.

This NavePoint rack is a solid choice for smaller server rooms or home labs. The glass door is a nice touch for visibility, and the cooling fan helps keep things running smoothly. Assembly was a bit of a puzzle, but once it was up, it felt sturdy. The removable side panels make it easy to access equipment. Overall, happy with the purchase!

Looks sleek and compact. Great quality. Assembly was a breeze. Wall mounted, I went all out reinforcing the wall, but it's not very heavy. Would've been just fine on standard 2x4 framing.

I don't know that I would trust it with 100 pounds of equipment; I have <50 lbs and it's... not great. It's mechanical strength seemingly comes mainly from the screws, not any rigid structure. If you take off the REMOVABLE side panels you may end up causing parts of metal to bend if you have a significant amount of equipment. I knew this was cheap, but I didn't think I would be worried about half of it falling off the wall.

Great value, went together very easily, and not too cumbersome to mount. Feels very sturdy. Comes with three locks for the sides and the front, but since this is my home installation I won’t need them.I’ll update again once I have my equipment mounted.

This NavePoint rack is very well made with all pieces fitting appropriately and fairly easy to install.The items were very well packed in the shipping box in order to arrive undamaged. The outside of my box was ripped due to the mishandling by the carrier but the contents were still intact thanks to NavePoints logistic packing.Assembly is very easy and took less than 30 minutes which included unboxing, laying the items in the right assembly order and using the provided allen key to screw the bolts into the appropriate slots and using a screwdriver for the other screws for the rack rails. This rack comes without wall mounting screws so factor that into your setup but probably due to the different walls this could be mounted to. This particular model doesn't come with the mounting rail to the wall but has 4 mounting holes 16 inches on center to be easily mounted to standard spaced studs. If you don't have studs spaced this way you can purchase a 3/4 plywood board that can be screwed to the studs first and then mount this cabinet to the plywood accordingly.A nice touch is that the side panels can be locked or not (there is a rubber plug that can be removed for mounting the provided locks). One downside is that there are three different keys for each lock, 2 for the sides and one for the front which is redundant and can be a hassle.Also this model comes with only a single fan, but there is a removable panel for a second fan if that is required and would need to be wired to the provided power cable. I purchased this due to the weight rating as it is rated for 110 pounds but will provide an update once everything is setup if it holds.So far very pleased with this product and the setup, great job Navepoint!