DP10013 High Voltage Differential Probe 1300V 100MHz 3.5ns Rise Time 50X/500X Attenuation

Excellent probe, especially for the price.

At first I thought the wrong probe was delivered. It was nothing like the pic or model from the manufacturer. But after researching the manufacturer web site, I received the upgraded probe with better specs.It works as advertised. Very good specs, especially for the price.Highly recommend if you’re looking for a good differential probe for your scope.

I was expecting a device that would shield my oscilloscope from high voltage while giving me a very rudimentary reading on certain high voltage items. The reality is this actually transfers through a really good quality waveform. For the price, this is a must-have for anyone using an expensive oscilloscope in the presence of high voltage.

When compared to what is on the market, this probe set is a good buy. And it is of good quality. I've heard some complain that they didn't receive the micro clips and wall plug, but I suspect those were purchased from third party vendors that may have removed them. Purchase from Micsig, and you will receeive what you are supposed to get. I have no regrets, and I recommend this differential probe set.

I have used this class of high-voltage differential probes for most of my career now, but paid about 5 times more to get the Tek name. This probe was delivered to me the day after I ordered it from Amazon and I am thrilled with my purchase. It comes with a full set of accessories and a perfect carrying case to hold everything. Tremendous value for the money. I haven't found any downside to this, so far, although I am not using it in my normal 800VDC switchmode environment. I purchased this one for work on a 15V high-side load switch and its low voltage performance is as good or better than the high $$$$ ones that I have often used in the past.I have only one negative and it is very minor. The cardboard box that contained the carrying case did not get taped shut prior to shipping. Luckily nothing went wrong and the box stayed shut. I checked the contents thoroughly and found them to be untouched by human hands! Yay, robots...

This product probably serves its intended purpost, but unfortunately it comes WITHOUT any sort of AC adapter and the input probes are very large gripper type clips, MUXH too large for small circuitry. There is NO option to utilise any other sort of input probe, making it useless for small circuitry.

Used to investigate arc re-ignition of relay when switching AC inductive load and it works perfectly. Also tried it on the 5V calibration output of the scope and yeah it was slightly noisy but still looked really good. Keep in mind this is designed for high voltage and the attenuation setting is 50x or 500x unlike your typical probes that are usually 1x and 10x. So far I couldn't be happier with this probe and I'll be sure to update this review if anything changes.

I have a dual-channel scope but it does not have isolated grounds for each channel. Therefore, I can't measure signals with different grounds in dual-channel mode. For current, this is not a problem, since I can use a hall-effect current sensor which is isolated. However, when I need to measure two signals with different grounds (for example, the high-side and low-side FET's in an H-bridge), I couldn't do it previously. Now, with this product, I can isolate the high-side FET and measure it at the same time as the low-side. With 1,300 Volt capability, this probe can safely measure high-voltage waveforms for Motor Drives and UPS systems, for example. I have not had a chance to verify linearity yet, but I have confidence that it will prove performance within spec. Emphasis here, it's a great value!