Specifications: Rated head: 8m Highest Head: 10m Rated capacity: 8L/min Max capacity: 15L/min Maximum speed: 3360r/min Motor rated voltage: 220v Motor max. current: 0.9A Motor wire material: copper Motor power input max.: 90w Motor mains frequency: 60HZ Motor shell material: Stainless steel Impeller & Pump body material: brass Pump interface size: 3/4 (outer diameter 25mm) Installation size, pipe connection: 1" or with adapter 3/4" Dimensions of connector and water flow switch: 1/2 (outer diameter 20mm) Installation max. operating pressure: aprox 15psi Installation steps: 1.Please turn off the electricity before installing the pump. 2.Wrap the raw material tape on the water inlet, install the adapter, and use a wrench to tighten the gasket placed in the adapter. 3.Wrap the raw material tape on the water outlet, install the automatic water control switch, and use a wrench to tighten the gasket placed in the screw mouth. 4.Connect the connection line of the water control switch to the pump body equipment (the buckle is fastened to indicate that the connection is successful). 5.Connect the water heater inlet hose to the water control switch of the water pump outlet, and tighten it with a wrench (the hose has a built-in gasket, and the screw is wrapped with raw material tape). 6.Connect the water inlet of the water pump to the water pipe with a hose connection number, and tighten it with a wrench (the hose has a built-in gasket, and the screw is wrapped with raw material tape). 6.Fix the water pump, plug in the power supply, and it can work. Tips: 1.The pump is used on pipes with acceptable water flow and then can start or stop automatically. If there is no or very little water flow, it would not fit. 2.Do not install upside down, to prevent leakage into the interior of the motor, causing a short circuit and burn out the motor. Package Include: 1 x 90w booster pump
Trustpilot
2 weeks ago
1 month ago