🔥 Stay Cool, Look Hot! 🖤
The AmazichaVivid Black Mid Frame Air Heat Deflectors Trim Set is designed for Harley Touring and Trike models from 2009 to 2024 (excluding 2017-later models with Cool Flow Fan). Made from durable ABS plastic, these deflectors effectively redirect engine heat away from the rider, ensuring a more comfortable experience during hot rides. The sleek gloss black finish not only serves a functional purpose but also elevates the overall aesthetic of your motorcycle.
L**.
Mid frame air deflectors
Fit great, looks good. Should come with speed clips in models without them as part of the hardware.
R**S
Missing 2 items
I received 4 screws and 2 backs to screw into. 2 screws are missing
A**J
Received item and installed less than 20 mins
F**
They do fit 2019 Roadglide Special
Let me start by saying these are hands down a great product for a fraction of the cost of the HD version and they come gloss black already. Paint finish is perfect and the fit is perfect. Now for the installation with this you need to be a little handy and patient and be advised you will need 3 nuts as they don’t come with the package and you’ll need 3 additional flat fender washers that also don’t with the package. The left side deflector you use the existing threaded hole in the frame for the top hole and you’ll nut and bolt the lower hole using a total of 2 bolts supplied in the package along with 3 washers and 1 nut on this side. You’ll need to remove the Seat and the side cover and loosen the plastic housing holding the ecm and push it aside to get your fingers in to instal the nut on the back side. For the right side you’ll need 2 bolts supplied in the package along with 2 additional washers supplied by you and 2 nuts supplied by you. This side you cannot use the existing threaded hole in the frame unless you drill another hole in the deflector which would be very hard to measure accurately so the easiest way is the nut and bolt the top and bottom. Remove the side cover and you’ll be able to access the back side of the frame to instal the nuts. It’s a tight fit but with someone holding a flash light and a retractable magnet it’s doable. Great product just be patient you’ll be happy when it’s all done and the money you saved.
R**.
Great Alternative to OEM
I was a bit skeptical at first, but for $20 figured what the hell. Now I am super impressed with these. They look amazing! When Harley only offers a matt black set, I knew I needed chrome. These came with almost everything needed to install. The only additional hardware I needed were the U nuts for the top mounting hole on the bike. I purchased them from my Harley dealer, although they can probably be found at any hardware store too. Surprisingly the driver side was much easier to install than the passnger side, even though the bike leans left while parked, there is much more room to work with big hands or fingers than there is on the passenger side. Make sure you have a 10mm wrench to tighten the bolts as even my smallest ratchet didn't fit where I needed it. I still haven't ridden so I can't speak on how well they deflect the heat, but the price is worth it evem for the look. Beautiful chrome finish, and I didn't experiemce any scratches. Total install took 30-45 minutes.
A**Y
Be warned, you're going on a trip for some hardaware.
I'm not sure what model touring bikes have threaded holes for these at the top bolt location but my 2011 FLHTCU did not. You'll have to get a nut to go on the other side of the bolt for these and it's not fun to get a wrench or socket on the backside, have fun!!
N**S
Pain to put on but once it’s on it’s on
Comes with washers , spacers bolts, packaging good and paint is perfect, just very tight install, i bolted top part and zip tie the bottom.. i didn’t have the correct tool for that tight spot ..
S**E
Great for heat, not your sweat!
I recently purchased these deflectors and they do a great job of keeping the heat away! After about three hours of continuous riding, just a little heat could be felt.The major downside with these deflectors is the hardware. I ride a ’15 Road Glide. For a complete install, four (4) nuts are need for the four (4) bolts. Only two (2) nuts were included for securing the bolts in the upper holes. I went to purchase additional nuts along with a automative pickup tool. I highly suggest investing in one b/c this is the only way to push the nut/bolt from the topside to the center of the bike.Unfortunately, this install isn’t a quick one. Took some sweat and more time than I expected. I found it easier to use my tools to tighten down the bolts from the bike’s left (clutch side). There is more room to move around compared to the right.
B**E
Ripped off
Received wrong parts! Never hot replacement or refund!
Trustpilot
2 weeks ago
1 month ago