Sliding Door Handle 8" Aluminum Sliding Glass Door Pull - Sliding Patio Door Handles Fits 6-5/8 in Mounting Holes for Old or Damaged Door Pull - Perfect for Patio and Glass Doors (Black)

See the great before and after photos. I wasn’t positive it would fit since some of the measurements were slightly off compared to my original handle, but it ended up being a great fit. It didn’t include instructions, but was able to figure it out in about 30 minutes with some tinkering and using the product description photos. It works well, definitely takes some troubleshooting as far as where to put the strike plate in order for it to latch correctly. The handle feels great, we will see how it holds up over time.

Solidly built, extremely easy to install. Just what I needed to slide open a heavy patio door. Locks easily and looks architecturally great with the door.

Worth the money, I hope they don't jack the price now. Very good looking handle, practical, smooth and very easy to install. The design is very well though of, it hugs the frame so we'll so it does not loosen during the use.

This may be the most time spent on a review taking pics and downloading etc. but I wanted to help others out. First make sure you are needing 6 5/8" holes. I bought another door handle that didn't fit. This one did fit but a few items to note: 1. Keep the original screws from your handle the ones that came with it weren't the same length or thread type (see pics) *Also side note mine only came with one screw but since it wasn't correct anyway I did not complain to the seller. 2. Came with silver flat head screw the original had white rounded screws. 3. I needed washers. Depending on the thickness I personally needed 2. I tried two it seemed to stick out. I tried one and it wobbled a bit which was annoying so two it was. It does stick out a bit but now it seems very sturdy and I am happy with the end result. I didn't want another wooden handle as that was what broke originally and this home is only three years old.

It was very easy to install and is heavy duty enough to open and close my heavy glass doors. It also looks super classy and was a big upgrade to my old wooden one. The installation was super easy and fit just right. Make sure to measure before you buy.

Love this door handle. It is much more sturdy than the typical glass door handles.

DID NOT THINK WE COULD FIND AN EXACT REPLACMENT FOR A SLIDING DOOR HANDLE FOR A HOME WE BUILT IN 1987, BUT WAHLA !! THIS FIT PERFECTLY

Pros- Looks Nice and fits my 1-1/8” door.- The handle is comfortable.- The instructional video posted on this listing is helpful.- 4 Hook Latches sizes.Cons- No written directions provided.- The 5mm pin on the Keyed Cylinder Lock doesn’t reach the triangular hole when installed on a 1-1/8” door causing the key to spin and not work.- The Hook Latch isn’t quite thick enough to be securely tightened by the retaining screw so sometimes won’t engage. A thin washer (not included) solved the problem.- Both exterior and interior locks are thin plastic compared to my previous lock set.- The Latch Keeper is thin and flimsy. The paint easily scrapes off and the 0.51” screws are too short to provide long term secure attachment of the Keeper.- The longest 1.37” mounting screws are silver and don’t match the black hardware.This should be an easy installation but because of various inadequacies in the hardware it took several hours of installing, re-installing multiple times, and a trip to Home Depot.On day one, I got the “Handle Set with Lock” to work properly, though the exterior keyed lock still isn’t working. Before installing the Set on the door, I put the lock set together (with the handle) and the key worked just fine. However, once installed on the door, the key no longer worked. It took well over an hour and 3 re-installs to finally discover that the 5mm pin on the cylinder lock doesn’t reach into the triangular hole on my 1-1/8” door causing the key to spin endlessly.Another issue was the Latch Keeper. I ended up using the one I had because it’s much more durable. The Keeper that comes with this set is thin, flimsy, and the screws are too short to ensure the Keeper stays put long term. I scraped the paint just by installing it. To me, that says something about quality and durability.On the Third Day after installation, at least 60% of the time the door wouldn’t lock any more. In checking it out, I found that the Hook Latch had a lot of play in it and at times would no longer be positioned correctly to go into the Latch Keeper. I uninstalled the Handle Set and found that although the Hook Latch retaining screw was tightened as far as it could go, the Latch was not secured tightly. There was a small gap between the screw and the Latch allowing it to move around. A shorter screw would not work because the raised hole where the screw goes is taller than the Hook Latch. I had to go to Home Depot to get an appropriate washer to compensate for the gap and securely tighten the Latch. So far, this seems to have solved the problem.All said, I like the look of the Handle Set and the comfortable feel of the handle. Although the handle feels durable, the rest of the hardware seems flimsy. The Set ended up being a pain to install with a lot of time spent trouble shooting. And I paid $26.86 (with tax) for a Sliding Glass Door Handle Set with an Exterior Lock that doesn’t work. That’s 3 times the price of a Set without a lock. At this point, I'm not sure how well this Handle Set will hold up. I could be facing yet another issue after posting this review. I'm being generous by giving the product 3 Stars because I like the look of it and didn't have to do any modifications to my door. But to my mind it's more accurately a 2.5 Star item.