ANCTOR Twin Bed Frame with 3 Drawers, Upholstered Platform Bed with Storage Headboard and Charging Station, No Box Spring Needed, Easy Assembly, Beige

Nice bed frame. Kinda easy build, but 2 pieces came bent. Great charging feature. The drawers are okay. But fully functional. Nice fabric.

We bought this bed for my ten year old daughter and have loved what a good buy it was. We were able to easily assemble, disassemble when we moved, and assemble again without any instructions. It looks like a high quality bed for a low cost.

Easy to assemble. Looks great. We've had it set up for a few weeks now and it feels sturdy, the drawers are easy to maneuver on carpet (I was worried since there is no track) and there are no squeaks or anything when you get in and out of bed or move during the night.The only 2 reasons I did not give 5 stars is because the linnings for the drawers did not fit well, but are still usable and useful. And this bed sits MUCH lower to the ground than I thought. I admit that is my fault for not getting out the measuring tape before placing my order, but it is very low. Great for kids or possibly older people who can't get up into bed, but my boyfriend is 6'4" and I hate sleeping low to the ground so we ended up keeping our boxspring under the mattress for added height. It covers a lot of the headboard and doesn't look as good as the photo, since you can see the boxspring, but it works for what we wanted and is the perfect height for us now.

Perfect quality, material, color everything is amazing was easy to put together, the drawers needs kinda like a plastic or something to cover the clothes because under the bed can get dust and bugs so just like suggestion but this purchase was the best

We love our new queen bed frame! It added a modern look in our dated bedroom! The slats are attached with Velcro so it does not shift around like others. The way the drawers were assembled is ingenious! They are Not for heavy storage items, and everything works fine with wheels and easy to push back in place.Overall, highly recommended. Due to shipping and perhaps also due to the heaviness and bulkiness of it, a little cracked on one of the frame and Customer Service were on top of it and responds quickly!

This frame was hard to assemble. Took us two hours to put it all together and we organized it first. My fault that I didn’t realize it was just a king and not adjustable frame for our Cali king. Other than that it is sturdy and I love the headboard. The doors are pretty funky as my left drawer on the one side doesn’t stay locked. Also don’t like the wire inside the drawers. Enclosed wood ones would have been better. They give you plastic to Velcro in it that just doesn’t work the way it should.

The media could not be loaded. I purchased the ANCTOR Full Size Bed Frame with 3 Drawers, Upholstered Platform Bed in Grey. I had no problems with the bed frame itself. I would recommend obtaining this bed frame if you like the style.I had to pay extra for shipping. The box it is packaged in is about 24"x58" and listed at 106 lbs. The box arrived damaged but there was no damage that could not be fixed. The only damage I discovered was the metal frame support eyelets were bent (see picture). This was simple for me to fix with a pair of pliers. All the fabric and wood pieces were not damaged. I am impressed with the packaging.PARTS: Packaging all the parts into a relatively small 24"x58" box was impressive. I found no defects in any of the parts, disregarding the damage occurred by shipping to the a few metal pieces. Some of the wire frames of the drawers were slightly bend. This could have been from the shipping damage I suppose. I bent the frames back into place. The nylon drawer bottoms are annoying for me. I do not see the point but I guess it is a nice option for some. I will line the bottom with cardboard from the shipping box. The fabric seems durable and there were no stitching problems. The fabric is not super soft, but I do not expect it to be that soft. It is the same color of gray I was expecting and what was advertised. The wood platform slats had no issues either. They are not finish quality, so they are slightly rough and I did not notice any knots. I did not get any splinters, nor did I experience discomfort installing the support slats. The electric charging box works as expected. The boards attached to the top of the head board had not defects. One piece had some glue on it. WARNING: if you remove glue from either of these two pieces, be extremely careful. One can damage the "sticker" that decorates these boards.INSTALLATION: Very easy. The manual is very IKEA like. It is mostly pictures and some important notes. The screws and parts were 100% labeled correctly. Orientation is clearly shown in the steps. I took inventory of all the parts. 100% correct. But, through out the process, I lost two washers. I suspect one of my cats had more fun than me. I am very experienced in cheap furniture assembly. I used my hand flex shaft screw driver (helps a lot and saves time) with a 4.0 and 5.0 hex instead of the supplied ones. I did not find the need to use a drill. I did assemble the drawers first, mainly to remove parts. DRAWER WHEELS: be gentle when snapping them into place. When I attempted to slide two sets of wheels forward, I broke the front snap piece. I am too strong I guess. It does NOT affect the structure, but was more frustrating. Do not tighten any screws down until all the screws are in their holes for the part one is assembling. This will assist aligning parts correctly. I had zero issues with alignment. I did this for steps 3 & 4 (Headboard) and steps 9,10,11 and 12 (Frame). I just hand tightened the screws in all the steps, and then once I was ready, I tightened all of the screws. Total time to assemble was about 2 hours, at a relaxed pace. Only one point I was confused in the instructions. Step 6 has an L Brace that screws ONLY into the side of the headboard, no the top board that has the electrical outlet. The non screwed side I guess is physical support only. I think there is one error in the instructions, Step 4. The lower horizontal metal support brace of the headboard shows that it is screwing into the lower metal vertical supports. The picture shows screw hole on the vertical supports, but the screw holes are on the opposite side. This is evident in the zoom in area. In fact, in Step 3, it has a specific note for orientation. Follow this note and all will be well, despite the possible incorrect depiction.SUMMARY: I like this frame. It was fairly cheap and shipped quick and easy to assemble. Much better than the expensive local stores. It does not shake a lot. The box spring and mattress shake more than the actual frame. I think this is good. It has side ledges so that the mattress will not slide off the frame easily. The drawers, while not attached to the frame, slide easily on my carpet. I have not seen any frames that have the drawers attached to the frame in this price range. The side drawers do attach physically. The foot drawer is a flush and friction fit. I used the box spring to raise the height. I think it looks ok against the headboard. If one is expecting to prevent animals from getting under the bed, this may not work well. If the headboard is flush with the wall, I think it will help prevent animals from getting under the bed. If it can not be flush, like my setup, then animals can get underneath the bed through the back of the headboard. Also, if the mattress or box spring does not fill the entire frame, animals could sneak into the bottom of the bed, through the area where the wood slats are. My solution, I attached cardboard to the back sides to prevent my cats from access under the bed. Not elegant, but no person will see it. Pillows might also work. Sadly, the width of this frame is a little wider than my full size box spring and mattress. The width is correctly advertised. I just did not think of measuring my mattress. But, with my queen sized comforter, I can not see the extra 2 inches.

We purchased this queen size frame for our master bedroom to replace a 30-year-old wood frame, box spring and mattress. We are combining it with a new BeautyRest “hybrid” mattress since this frame does not require a box spring.We were very impressed with the quality of materials in this kit — especially the gray fabric, which looks like a linen upholstery fabric — and the precision of how the parts came together during assembly. The weight-bearing portion of the frame is made of steel, so it’s very strong. That said, this kit is not for the faint of heart. While the instructions are very clear and well-illustrated (22 steps!), the kit consists of no less than 117 pieces of hardware and connectors, and 45 pieces of frame components. Plan on spending an entire afternoon assembling it (I assembled it myself while watching the Packers lose to the Steelers). There are lots of screws, so I strongly recommend using a cordless drill or power screw driver to save time and avoid wrist fatigue.Despite the rather lengthy assembly time required, this Anctor bed frame is a great value for the money.