VEVOR Sheet Metal Brake, 12-inch, 3-In-1 Combination Shear Brake Roll Machine, 20-Gauge Capacity Shear Press Brake with 90° Max Bending Angle, Shears and Slip Roll Machine for Shear Bending Rolling

This is one of several Vevor tools I've recently purchased. They are very well constructed and accomplish the tasks they are designed to do. I didn't need a full sized metal break or roller and certainly didn't want to take up all the space full sized metal working tools take. This tool is really nice, easy to use and takes next to no room on my work bench.

Excellent product for price, hard to uncrate

They really shouldn’t bother assembling this thing before shipping it out, you’re going to need to disassemble the entire thing to begin with. Everything is coated in machine oil, which I expected, but they used machine oil to lubricate everything also, which made the machine function extremely poorly. When disassembled I had to debur and chamfer a lot of things also to smooth out the operation. Greased all of the gearing and movement surfaces. Do not use a solvent based cleaner, the machine is not powder coated. It has a really cheap almost spray paint finish that’s applied over the original reddish finish “meaning the machine is produced elsewhere, painted and rebranded” the blue paint was coming off just wiping it down with denatured alcohol. The machine was shipped in a wooden crate, luckily bolted to the wooden crate, as the shipper delivered it upside down, cause they obviously couldn’t tell the pallet feet go down. The machine was pretty banged up, the finish was chipped and scratched on pretty much every surface ac the pic shows some may have been from shipping but the other half was obviously done at the factory as the chips/scratches had the same machine oil coating them. Overall it works well but the fact I need to spend 3 hours on cleaning and disassembly/reassembly, along with the condition of the machine I’m knocking it down to 2 stars.

This little machine will cut 20ga stainless steel. You do have to bolt it down solidly and finely adjust the cutting head to have as little of tolerance as possible also clamp / secure the piece you are cutting then stand on the metal on the deck and pull up as hard as you can maybe 150LBS of force, wear gloves the sharp corner on the handle will cut you with no gloves and then and only then if all the stars align and your strength does not give out and if luck is on your side then it will cut.So, it works if you take time and re-adjust the head for each cut. The bender works quite well. I have not used the roller yet.

Built to last. Great for cutting thin aluminum. I use this for sublimation projects. Heavy product. Easy to install handle and set up.

The only reason I did't return this is that it weighs close to 90 pounds and the shipping box was destroyed! I tried to get a partial refund but there wasn't an option to do so. Parts were bent beyond use and the unit was completely non-functional. This was NOT shipping damage. It left the manufacturer this way!!! UNTESTED!!!!!!! The handle would not turn completely around. It would go from the 8:00 o'clock position to the 4:00 position and jam!!! (Moving Clockwise ). The adjustment knobs were bent so much that they were un-usable. The photos do not indicate how bad they were to use. The photo of the screw and nut on the back side is what I finally do to make the unit work. I replaced the screw on the front with a much smaller 1/4 inch bolt and a locking nut. This holds the shear blade in position and allows the handle to turn 360 degrees. The unit is now functional but it cost me OVER $100 in replacement parts and modifications to get it working. I didn't bother trying to work with the manufacture because they are total crap!!! It was not worth the frustration!!! DONT'T BUY THIS!!! Pay more money and get something of quality from a different manufacture!!!

Worked great for a small project I was working on; plan on using it a bunch more

Product arrived damaged. We bought this to use at tradeshows to demonstrate the use of a press brake and shear, but this arrived bent and twisted and beat up. Very disappointed.