nibbiRacing Parts Motorcycle 125CC Air Intake Manifold 33mm Carburetor Manifold Carburetor Adapter Manifold Adapter Intake Manifold Boot for YAMAHA Minibike Dirt Bike Motorcross TTR SSR

I bought this product (nibbi hose/manifold adapter) with the nibbi carburator as this was the "recommended" on the "buy together".I bought it for my son's 125cc mini Jeep.Looks: Initially the hose adapter looked good, strong and we'll built.Fitment: when installing the product I noticed the screws wouldn't align properly so I measured the distance as specified on the description and measured the original manifold. The difference was minimal, but not accurate as described. But switching the screws and some adjustments I was able to make it work.Performance: When I installed with the nibbi carburator and filter included it was a little bulky so I had to modify my mini jeep a little bit to make room and it all fit perfectly. Rode on the first day fine. My engine kept shutting off but I figured it was the carburator settings as all new carburators you have to play with it a little until you get the right setting to make it run smooth. Got the settings straight and ran good and smooth.The second time taking the mini Jeep out (several weeks later), It wouldn't start. Again, I thought it was the carb settings. However while adjusting the settings on the carb my son sat on the Jeep and as it moved a little I noticed something weird on the hose/manifold adapter. I looked closer and noticed it was cracked/ripped/snapped.Why only 2 stars for "Value for Money"?Well, I was only able to use this twice and for a period of 40 minutes the first time and 1 minute on the second time. If you compare this item value with other competitors it would be really good. But if you the the $15.99 and divide it by 41 minutes of use..... It's pretty expensive.Maybe 2 stars was too high.Here's another very sad point....I bought this a while back, but because of work, school, life, etc. I wasn't able to install it and use it right away. But once installed I used it the first time. When we came to use it for a second time which was last Tuesday 3/23/21. And it was then when I discovered that it had broken. Well because none of us have busy life with work and stuff we are just sitting waiting for our Amazon orders to arrive in the mail so we can use them immediately... Right?!?So I couldn't work on getting the part (hose/manifold) adapter out until today so I can take better pictures and contact the company to see if they would replace with one better or if they would refund the money.Well, finally had time today to do that. Once I took the carb out and the hose/manifold adapter out and open my Amazon orders I found that this one item says; "Time to return item expired 3/1/21" wich was yesterday.Yup, really bad lick here.If I'm contacted by the company/seller/manufacturer and anything positive happens I will update the review.Otherwise, this is a really good item for $15.99 that you will use for 41 minutes give or take!

The media could not be loaded.  Manifold face looks pretty rough. Not smooth enough to bolt onto engine. Luckily I’ve got extra gaskets and I’ll grind that ridge down. I really like Nibbi products and for the most part I feel they are well made but this right here is just stupid

used with apollo125 and moto125 dirt bike

Do your self the favor and trash the included hose clamp and buy a basic 5/16s hose clamp from you local hardware store! The carb keep falling off while I was trying to tune even after cranking the clamp with a ratchet. Switched the clamp after the 3rd failure and no issues yet🤞

Ok product does the job just be prepared to chase threads with a tap. Both holes where drilld and tapped at angle outwards axial was first issue and also full of rubber had to retap cleaning threads also some people in reviews Saud they had bolts mine did not come got two packs with no bolts other than that they are perfect for my application 1 is a x15 apollo and my boom vader (grom) clone The benefit of this intake adapter is that it's shorter than the standard casted metal one that uses a silicone pipe to connect it It also reduces 2 bandclamps down to one

The hols are not in the middle for a reason( at least in my mind lol) but it worked out cause the nibbi carburetor need to be move up a little and this with the seal aloud me to get everything to seal and enough space to fit it perfectly. I used this on a taotao cheetah 125cc ATV with stock intake runner.

Worked on a 125 Horizontal engine

Okay