Solar Controller, Solar Charge Controller, Charge Controller, Solar Charge Controller 12v, Solar Panel Controller, Solar Regulator, Solar Controller 12v, Solar Panel Charge Controller, 12V, Huangcom

Description

Common Q&A How to install?A: (1)Battery --->(2)Solar panels ---> (3)DC load. Disconnect order is (1)DC load --->(2)Solar panels ---> (3) BatteryQ: What battery type is this controller supported?A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.Q: Why the LCD screen become blank?A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default).Q: Why does the controller display 14.4V?A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don't worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V.Note: 1.Make sure the voltage of your battery reach 11V for initial use, so as to start up for the controller to registered the battery type accordingly. 2.Old batteries may be degraded the capacity after hundreds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”). 3.Indoor use only: the working temperature of this controller is -35°C to +60°C. During hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.Package List: 1 x 30A Solar Charge Controller 1 x English User Manual