32.8FT 18 Gauge 3 Conductor Electrical Wire,18/3 Stranded Tinned Copper Low Voltage Wire, 18 AWG Flexible Extension Power Cable for LED Lamp Lighting Automotive, White

Good value per foot on this three wire cable. I won't be using all three wires but I wanted a white casing for an LED lamp I'm building. The white outer casing is quite thick and keeps the cord from bending too sharply. This outer casing did tear slightly unevenly when I removed it with my Klein auto adjusting wire stripper but this won't be seen on my finished project and could be avoided using regular wire strippers very carefully. I was able to strip all three small wires at once with the Klein tool and the tiny casings cut cleanly. The fine inner wires are silver colored on the sides but you can see copper on the ends where they were cut. I'm not an electrical engineer and won't claim to know the pro/cons of the tinned wires vs bare copper, either would be adequate for my planned interior lamp.

This 18 gauge, 3 conductor wire is great for LED lighting projects. I am using this to connect from a central LED lighting controller in my basement to some LED light strips on the main floor of my house. I have my power supplies and WLED smart lighting controllers in the basement and ran these wires up through the walls to the locations of the LED strips.The wire is fairly flexible and small enough to easily pull through small, tight spaces. The stranded wire works just fine. My LED strips are, on average, 25 feet from my controllers / power supply, but I have minimal power loss to the LED strips.If you plan to use these for LED lighting projects, make sure you are getting the right number of conductors.

It enabled me to complete my electrical projects by providing reliable power transmission and flexibility for a wide range of applications. It provides a reliable solution for LED lamps and lighting fixtures by providing excellent conductivity and corrosion resistance.

I'm using quite a bit of wire in a marine environment. This looks to be of good quality. The tinning is well done, and looking at the wire under a microscope I can verify that it is in fact copper, not copper clad aluminum. Longevity will have to be a wait and see, but I wouldn't hesitate to use this on my boat. However, it is not labeled for marine use (UL 1426).Given that this is 18 gauge it's going to be for fairly low current applications, depending on the length of the run. But 10 meters is a reasonable selling length unless you are involved in a big project.The protective cover is thin- we're not talking for landscape use. It seems fine to me for low voltage interior or marine use. The description correctly identifies the cover material as PVC, but "premium flexible silicone" is also specified. This is NOT silicone insulated wire. The insulation readily melts when soldering, which silicone does not. If you need silicone wire for the flexibility or low temperature use, this is not it.At less than $.65/ foot this is a decent deal.

This is super 3 conductor 18AWG wire. Has good insulation both inside and out. Is very pliable. The gauge and pertinent data is printed along the full 32.8' length. It is fine stranded tinned copper wire excellent for exterior or interior use. Will be perfect for the new 250 watt LED High bays in my shop. And the price is Right.5 Stars for This 32.8FT 18 Gauge 3 Conductor,18/3 Stranded Tinned Copper Wire

I needed wire extensions for my kitchen LED lights and these were a perfect companion. The quality feels really nice and it does not feel cheap whatsoever. The important part is I was able to use this with my 32.8 ft COB lights without any overheating. I love this and I highly recommend them.

Solid jacket, nice strand count, good quality for the priceno complaints. i will say that, the introduction of any element or molecule other than copper or silver, to a copper conductor must decrease overall conductivity, and that's a fact. but with these sizes and loads, it's really a non-issue. thanks

Seems like I'm always looking for a short piece of wire for some project or another. I have several landscaping projects in mind and plan to add some accent lighting and controls to my golf cart. This wire will be perfect for both projects.Just keep in mind the 7.5 A limitation on this wire.