Specifications:
Working voltage: DC5V/12V/24V
Working current: <20mA
Frequency range: 20Hz-400Hz
Output mode: switching signal output
Humidity: 0-95% RH
Size: 4.4x3.8cm/1.73x1.5"
Interfaces:
VCC: Positive;
GND: Negative;
NO: Normally open, NO and COM are disconnected before the relay is closed, and short circuit after the relay is closed
COM: common, relay common interface;
NC: Normally closed, NC and COM are shorted before the relay is closed, and disconnected after the relay is closed
Instructions:
5A Over-current protection Sensor moduleuses current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM, NC, NO three ports to control the external circuit on and off, in order to achieve over-current protection.
Use the potentiometer to set the overcurrent protection point, the clockwise adjustment reduces the detection current.
1. Measured the wire through the current transformer, connect VCC and GND to DC12V power supply.
2. Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on, if connected to the relay means activated), then reduce or cut off the current flowing that through the tested wire , if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected, if connected to the relay means been released).
3. When reduce or cut off the current flowing through the wire , the relay is not released, will still need to continue to adjust the potentiometer to find the over-current protection point.
Package included:
2 x AC Current Sensor Relay Modules (5V 12V 24V Optional, you will get the two SAME ones, not mixed types.)
Specifications:
Working voltage: DC5V/12V/24V
Working current: <20mA
Frequency range: 20Hz-400Hz
Output mode: sw signal output
Humidity: 0-95% RH
Size: 4.4x3.8cm/1.73x1.5"
Interfaces:
VCC: Positive;
GND: Negative;
NO: Normally open, NO and COM are disconnected before the relay is closed, and short circuit after the relay is closed
COM: common, relay common interface;
NC: Normally closed, NC and COM are shorted before the relay is closed, and disconnected after the relay is closed
Instructions:
5A Over-current protection Sensor moduleuses current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM, NC, NO three ports to control the external circuit on and off, in order to achieve over-current protection.
Use the potentiometer to set the overcurrent protection point, the clockwise adjustment reduces the detection current.
1. Measured the wire through the current transformer, connect VCC and GND to DC12V power supply.
2. Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on, if connected to the relay means activated), then reduce or cut off the current flowing that through the tested wire , if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected, if connected to the relay means been released).
3. When reduce or cut off the current flowing through the wire , the relay is not released, will still need to continue to adjust the potentiometer to find the over-current protection point.
Package included:
2 x AC Current Sensor Relay Modules (5V 12V 24V Optional, you will get the two SAME ones, not mixed types.)
desertcart is the best online shopping platform where you can buy HiLetgo 2pcs 5A AC Current Sensor Current Detection Sensor Relay 5V AC Current Relay Module AC Sensor AC Current Relay Switch with Over Current Protection from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
desertcart ships the HiLetgo 2pcs 5A AC Current Sensor Current Detection Sensor Relay 5V AC Current Relay Module AC Sensor AC Current Relay Switch with Over Current Protection to Tripoli, Beirut, Sidon, Tyre, Jounieand more cities in LEBANON. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the HiLetgo 2pcs 5A AC Current Sensor Current Detection Sensor Relay 5V AC Current Relay Module AC Sensor AC Current Relay Switch with Over Current Protection speedily without the hassle of shipping, customs or duties.
desertcart buys HiLetgo 2pcs 5A AC Current Sensor Current Detection Sensor Relay 5V AC Current Relay Module AC Sensor AC Current Relay Switch with Over Current Protection directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.
Yes, it is absolutely safe to buy HiLetgo 2pcs 5A AC Current Sensor Current Detection Sensor Relay 5V AC Current Relay Module AC Sensor AC Current Relay Switch with Over Current Protection from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.