4 Stack Super Bright LED Andon Tower Lights with Buzzer, Red/Yellow/Green/Blue, Off-ON or Flash, 16 ft Extension Cord, 6 ft Industrial Adapter, IP53, 2.36" Diameter 20" Length, Plug Play Ready

I've been using the ANDONT 4 Stack Super Bright LED Andon Tower Lights with Buzzer for six months now, and I must say I'm thoroughly impressed with its performance. The super bright LED lights are highly visible, even in bright daylight conditions, making it easy to monitor the status of equipment from a distance. The option to switch between Off, On, or Flash mode is extremely useful, and the built-in buzzer provides an additional alerting mechanism.The 16-foot extension cord and 6-foot industrial adapter have been very convenient. They allow me to easily position the tower lights exactly where they are needed. The plug-and-play feature made the setup process a breeze, and I was up and running in no time.Overall, I highly recommend the ANDONT 4 Stack Super Bright LED Andon Tower Lights with Buzzer for anyone looking for a reliable and versatile visual signaling solution for industrial or commercial applications.

This tower light is pretty solid quality and well made. The colors and vibrant and LED light is very bright. Making its very visible. Installation is very simple with easy light operation switch.

Good traffic light. Durable. Easy to function good lights and easy to use , the lights are bright

The media could not be loaded. This warehouse/ truck dock light is quite bright and can be seen in the light very well. The red light comes with the buzzer/beeper noise. The noise can be disable though, so it's not a deal-breaker. You can switch all the lights in whatever order or combination you choose for the various purposes. The power cord is 72" and the line from the control box to the lights is 94". The light covers and their housing, as well as the control switch box is plastic. The mounting bar is metal. There are two circles on each of the long sides where it looks like you can remove the plastic and reroute the power cord for a professional looking installation.

These tower lights and buzzer are incredibly versatile and useful in a variety of settings. Commonly seen in manufacturing environments, these status lights signal operators when attention is required, making them indispensable for maintaining efficient production processes.The stack is not limited to industrial use; it can be adapted for almost anything. It operates on a standard 24v DC lighting control system. Each light can be triggered independently or in combination using a Type-C relay. The horn can also be isolated, allowing for fully automated control of all lights and the horn.I use these lights for a video surveillance system with four alarm outputs in my setup. Each light corresponds to one monitored area, so the respective zone lights up if there's activity. Multiple zones can light up simultaneously if needed.If you need to modify or extend the cable, be prepared to do some soldering. There's no terminal strip inside the light housing, so use a 5 or 6-conductor cable, depending on your needs. For connections under 10 amps, I recommend using 16ga wire. A six-conductor cable is ideal for the common connection, four lights and one horn.The unit's switch box is weather-resistant, making it suitable for various environments. Additionally, it can be repurposed for other uses if you decide to employ a different switching system for the stack. This makes this tower light a flexible and valuable addition to any setup requiring clear and reliable status signaling.

in daylight, the red light buzzer sound is loud enough and it plugs into an AC outlet. Our old tower only had three lights and the buzzer wasn’t loud enough. This tower’s buzzer is pretty loud. It only requires two bolts to install and it is light enough that two bolts hold it to the wall with no issues. It has an all-plastic housing except for the mounting pole and bolts (which are aluminum). Any combination of lights can be used. You plug it into an 85VAC to 264VAC socket range which covers all worldwide voltage requirements. You can easily turn off the dip switch to prevent the flashing red light and its associated buzzer by removing the blue light housing and accessing the control/circuit board at the bottom of the tower. The lights are LED and I don't see how you could replace the lights so not sure what the life expectancy would be for this tower. I suggest reading the online webpage description. I am happy with this tower as it far exceeds our old three-stack tower.

By default this has the red set to flash and have an alarm / buzzer, which in my case, was undesirable, but thankfully I was able to easily open the bottom light and access the dip switch and simply turn off the buzzer and the flashing, so now each color is simply solid on or off depending on the toggle switch. This makes it really easy to use and not audibly interruptive, which was the point. I used this to mount on the door outside my office so if I was on an important phone call, I could flip the switch to red, or if I was out I'd flip it to blue, in and available to green, or in and busy is yellow. super simple and super easy to use, so long as I remember to flip the correct switch, and actually turn in off when not needed any more.

Simple to operate, easy to see, can be moved around:This product is particularly great for a warehouse environment since a lot of heavy machinery can be moving around at one time. My newer employees have been able to figure out how to use this product almost immediately due to the intuitive design and very clear color-coded switches / labels. The lights are pretty bright once turned on and are easy to see even in brightly lit environments and the buzzer can be heard even while loud equipment is operating nearby. The product is large enough to ensure adequate visibility but light enough where you can install it with just one person pretty much any place that's near an outlet or extension cord.Overall, this is a great set and I would recommend.