VanAcc 10x12x7.5 FT Outdoor Storage Shed with 2 Clear Panels Hinged Double Doors 4 Vents, Backyard Metal Shed for Garden, Patio, Dark Grey/White

This was a pretty easy install with basic tools for an average DIY project. I ordered it and built the floor while I was waiting for it to arrive. Shipment arrived in three pieces on two different days. All parts were complete and clearly labeled to follow the instructions. I did most of the work by myself, but you will need a second person when installing the wall panels. The wall panels are a little flimsy and someone needs to hold them while another person screws them to the frame. Make sure and read the directions very closely for the roof rafters because they are directional and your screw holes won’t lineup for your roof panels. Just go slow and be detailed. I completed this in 5 days, working on it about 3hrs each day mostly by myself. I’m very happy with the value and size of the building. Would definitely buy this again.

The frame is not able to hold the shed up without the sheet metal to attach the frame. There are three segments to the frame that are INDEPENDENT of each other. Bottom Frame, Middle Frame, and Top frame. NONE of with connect to each other. Instead the sheet metal must be held in order to attach the frames to it to allow rigidity to the structure. This Project took us almost 4 days due to the frame being flimsy and swaying 6in to a foot each time trying to attach a fastener. Nothing lined up the first try. I have four people and it took almost 4 days. Two were teenagers so they were not much into helping... but this could have been much easier if the metal was damn near paper thin and the frame actually being a frame instead of wall decor.

Purchased this shed for use on remote property near Canada. It needed to be capable of taking some rough weather and have little attention for long periods. This shed seems to have fit the bill. It is constructed of solid material and came together well on a wood sled base- so it can be moved if needed. A few things potential buyers should consider: 1) it is assembled with over 350 small screws and bolts. It takes time and patience to assemble. Two of us took two long days. Part of the challenge is that the small holes in the frame must be lined up with the panels. This is tedious and needs something like an ice pick to prod the parts into alignment. There are hundreds of small plastic washers that have to be under the screws, this can be very frustrating when trying to line everything up. We found regular screwdrivers better than power versions as the power ones tended to toss the screws, and we would have to find them. The project takes at least two people and three would be better. It is easy enough for men or women as none of parts are very heavy, just awkward. PAY CLOSE ATTENTION to the details in the instructions. Some panels have different screw patterns and will not fit the frame correctly. We also failed to notice that the packaging of parts is so tight that it is possible to install two panels at where only one was intended- our error. The other warning is to unpack and visually verify each part is there. We didn't and had to make a 5+ hour return trip to finish the shed as a roof beam was missing. (Note: the supplier sent the replacement very quickly and gave us no hassel). More our fault than supplier. You will need a ladder, at least 6 feet to assemble. Two ladders would be even better. They need to be stand alone as can not lean on the shed while assembling it. I was very pleased with how sturdy the finished project was. The metal is thick enough to be durable and the design is time tested. I am considering the need to use some filler foam as our location gets some horizontal rain and could go under some of the eve and floor joints. I much preferr this shed over the similar plastic one in my yard. Much more sturdy, spacious and, if ever needed, repairable. PS: if insulated and on a floor this shed could double as a cabin/shelter. The windows and skylight give it a much more "livable" feel.

Needs better instructions. I feel it should be a little more sturdy.

This is a great shed for our needs. We've our riding in lawn mower and equipment in it and items we wanted to get out of the garage. We put a storage shelf unit in one end of it. When we put it together, we silicone around the bottom and top to help prevent rodents and water getting into it. We also installed Slab flooring.Plenty of storage, looks great and has held up very well.I recommend this product.

Shed shows up in 3 boxes that were all in good shape. A lot of the metal pieces for the siding and roof were dented. Support beams were also dented. I was missing 2 pieces of the siding.i had shed fully assembled and bolted down and it was destroyed by 25 mph winds. It just folded in on itself. It said it was rated for 50 mph winds. Pure garbage and a complete waste of my money. I paid over 600 dollars just to be able to haul this garbage to the landfill! Very aggravated and displeased!

Well, I’m putting this together some of these brackets the holes don’t line up when I pulled panels out of the box. They were done here and there. I still have to put the trusses on in the roof on, but I mean, I don’t care if it’s done because it’s just a storage shut out my back, but it should’ve come in perfect and it didn’t big one of the biggest pain in the but is they put on some of the panels and you gotta pull apart all this film off stop it scratched like they got off 11 and a nine bracket on the sides they don’t lineup correctly. I tore apart 34 different times to try to get it to work no matter what I do the holes don’t line up correctly. They are over a half inch off so I basically, got some self tappers and screwed it together for support

This was a great price for its size. The sheet metal is very thin and the direction as usual are very hit and miss but if you have some skill shouldn’t be to hard. The roof was the hardest as the two clear panel are super flimsy and required caulking to the other panel to prevent rain from penetrating. Other than that, the little washers for the tiny sheet metal screws are something you need a little help to cut out of the grids and have them ready before you even start or you’ll be stopping a lot. Oh, and it arrived two days early and the delivery driver brought it back to my garage which is about 100 feet from the street. Three boxes and they’re all sort of heat and awkward to carry.