Hisencn Replacement Cast-Iron Pipe Burner (4-Pack) for Aussie, Bakers and Chefs, Barbeques Galore (Turbo), Centro, Charbroil, Coleman, Costco, Glen Canyon, Grand Hall, Nexgrill, and Other Grills

My grill is the Jenn-Air 720-0100 NG, I first ordered "bbq factory Replacement Cast-Iron Grill Pipe Burner JBX601 (4-pack) Select Gas Grill Models By Lowe's (Jenn-Air), Charbroil, The Source, Jenn Air, and Others" (http://www.amazon.com/gp/product/B00VKIKG0K?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00) from BBQ Factory based on the grill model # but the burners were wrong and had to return them. After doing some research I pulled the old burners and measured them, which are 15 3/4" x 2 7/8", so I ordered this set based on measurement however my grill is not specifically listed except maybe as "and others". Well it is a close fit but not perfect. The replacement burners are actually a little larger than the stated size, they are 15 7/8" x 2 15/16". This made it a little difficult to slip them into place, however, the pin at the end is off and does not fit into the hole in the grill (pin not shown in picture). I found this web page which shows a closeup of the pin on the bottom the burners with the retaining clip: [...]. There are common 2 models of burners, one is flat topped like mine, the other is tent-topped. So this time I matched based on measurements and how it looks but my grill does not match the hole for the pin... You need to know also that the igniter hole needs to match your grill, the tented burner I first ordered had the holes on the right side and the igniter on my grill is on the left, so this current model (flat top), even though slightly too big and pin in wrong spot appears to be the closest fit I can find so I will just modify my grill so that the pin fits... 4 stars because the price is very good, -1 star because fitment doesn't work for me and I can't find anything else (and modifying grill will be faster than messing with finding a different part...).

These burners are not quite a drop-in replacement for the old ones on my Bull Angus BBQ. The distance from the little post that drops into the hole at the back of the burner frame to the end of the round part that goes over the propane nozzle is about 1/4th inch shorter than the originals. On one of the four burners this caused the flame to sort of explode (not dangerously) out the rectangular holes at the sides of the burner where the air enters and mixes with the propane blowing out the adjacent burners that were already lit. The fix took me an hour and they are working like new now. I ended up cutting some 7/8th inch wide by 1-1/2in strips of very thin sheet metal, wrapping them around a 23/32 inch drill bit shank to make a little tube that then slid over the nozzles to essentially extend them into the round hole of the burners where the propane enters. If you're not that handy making the little tubes could be difficult.I found another even simpler way to make them work by simply sliding the burners back over the nozzles farther without the little post dropping into the hole in the frame. They would light and run fine but I was afraid that they would not stay in place long term so I came up with the more difficult fix.I expect these to last another 10 years like the originals. I would have given them five stars if they had fit out of the box but since I got all four for about half of what one of the factory-recommended cast stainless steel replacements costs, they are a great value and I'll go with four stars.

My 10 year old BBQ Galore Capt'n Cook Burners were rusted out and I found these. Awesome find, awesome price and they work very well. They slipped right in and for $50 or so I've got a brand new BBQ! I've seen these priced at upwards of $100 a piece not for a full set of 4. Not sure how long they'll last but I would assume at least a year and at this price point it would be totally worth it. They are not cheap feeling though and my expectation is that I get a good 5 years out of these before they too start rusting out.PS. I keep my BBQ covered so that dramatically adds to the life of the BBQ and components.

Very easy install - perfect fit. Nice even flame along the entire length of the burner on every setting from high to low. The only thing I've noticed so far is that after lighting the first burner on the right, the other burners wouldn't automatically light once I turned them on - I had to manually light them using my grill lighter. But I've long stopped using the built-in electronic starter and always use the grill lighter handy so this isn't an issue for me.

We had been having problems with our grill heating evenly for a long time and thought it would be really costly to replace these parts so we just lived with it. I found these grill pipes for our BBQ Galore Turbo and ordered them and now I'm mad that we didn't do this sooner. Heavy duty, nice quality and as soon as we placed them in the grill, we had nice even heat. I would recommend!

So far one year in these are holding up better than the OEM parts!

I have a Turbo 3 burner grill that is 23 years old - I was seriously contemplating buying a new grill for $1700 - saw these grill pipes and ordered them - they fit perfectly in my grill and provide an even flame - my grill is new again!!! Your product saved me $1700.

I replaced the existing burners from The one I got from Amazon were just like the originals one so they work great. I couldn't be happier. Thanks Amazon once again . Ps. The price I ended up paying for was very inexpensive compare to others places I quoted.