StemeduUSB GPS Module Vk-162 Glonass Navigation, Works for Stratux Windows 10 Linux for Arduino Raspberry PI Google Earth,Waterproof Anti-dust Magnetic

I intend to use this in a a grass cutting robot using a Raspberry pi and differential GPS. I did have difficulty getting it to work with the pi until I discovered you needed to edit the /etc/default/gpsd file as follows to point to the correct device :# Default settings for gpsd.# Please do not edit this file directly - use `dpkg-reconfigure gpsd' to# change the options.START_DAEMON="true"GPSD_OPTIONS="-n"DEVICES="/dev/ttyACM0"USBAUTO="false"GPSD_SOCKET="/var/run/gpsd.sock"The screenshot was obtained by running "cgps -s"Worked perfectly also with a GPS app in Windows 10 after selecting the correct com port.

I use it for time updates when i have no internet with Ham Radio

The unit worked fine after free software was loaded on the PC. Recommended

I had trouble initially with it working on a Tosh laptop. It would not connect. But using an HP laptop and all the troubles vanished. The receiver found satellites immediately - and it even works indoors - quite impressive. The seller was very helpful and patient in trying to get it working initially. Very pleased all round. A great bit of kit, good results, good support, great value.

This USB GPS module works perfectly, feeding the GPS and GLOSNAS data directly to the USB port. No setup was required and its acquisition time is really fast and the readings have been very accurate.I would recommend this device for any application where USB GPS is required.

Worked perfectly with my Raspberry Pi

Really easy to get going with the raspberry pi

Did not work properly on either windows or linux. Could not get a GPS lock from it on either platform.