Dorman 742-143 Power Window Lift Motor Compatible with Select Models

Tested out operation before install, work great. During install needed to use adapter to connect to factory wiring. Could not use factory bolts the new motor housing is thicker. Longer bolts were included with new motor. Installed was easy and works great.

Work as it should. Strong and quiet.

This was a 10 min job. From taking the door panel off, r and r the motor, putting panel back. This fit perfect on my 2005 blazer zr2 drivers door.

88 to 98 chevy k1500 742-143 is for passanger side and 742-142 is for Driver side.I had o order another motor .

My 2001 Gmc Jimmy Window was being intermittent. It stopped working for over a week and then worked again for 3 months until it stopped rolling the drivers side window down. Well back then I bought this part to change it. Since it worked again, I stored it for the 3 months or so. I had to use one of the applied adapters for my application. This seems to fit several GM models. The hardest pain is grinding the heads of the factory rivets off the motor housing and in such a tight space. I used what I had and started drilling through the center of the rivets after grinding the heads. Problem is the back side of the rivet head in my case is stuck between the regulator bracket. I cut the edge of rivets off going through the motor housing and I got 2 of the rivets completely out. Watch the hardware they give you, the head of the bolt or the nut depending on which way you get it lined up, may run into the window regulator. I got 2 bolts and nuts lined up and used the brace of the old bottom rivet to line up (3 total). I recommend removing the old rivets on the window regulator mine fell off and my window got stuck a year ago or so i should have changed the motor then. We put bolts and nuts in just like the window motor set up comes with. Also the old motor just needs to be cleaned it still worked after removing. Mine had a lot of moly grease on it! Make sure you have extra door panel clips!! They will break.

This motor is very cheap and it fits very well on my old regulator.I did have to sand a corner down to fit the regulator, but that corner was plastic and very easy to sand down. Other than that it was very easy to install, came with all fittings/hardware and connectors needed, and was a perfectly matched replacement for my broken motor. The motor works perfectly and is a great way to get your power windows working well with little money and effort!

Works!

It was for passenger side so I had to reorder for drivers side

had no issues work out of the boxthanks