EG STARTS 6X American Style Standard Arcade Buttons Switchable Happ Type 30mm Push Button 3/16" Terminal for Jamma Mame Kit Parts (Red)

I use these for "Call" buttons on my 4 lane slot track. When racing it turns off the power so others don't keep racing while you fix your wreck or falloff. Great prince and easy to install.

They worked and I used them all

Love these so much. Perfectly made, perfect mold for the pressed part of the button, good feeling plastic, the zing-ear clicks are omg next level I love those so much, fits perfect in the button, spring is good (unsure of metal type re: corrosion from humidity for long term but seems fine); and the electrode connectors on the zing-ear clicker are good, easy to solder or clip onto. Perfect colors for 6 pack Perfect buy.

Works ok.

The arcade buttons work as expected with no issues. They are well-built and feel durable.They perform just fine for their intended purpose, and I’ve had no problems with them so far. Overall, a good product that gets the job done.

These buttons are nothing fancy - they don't light up or anything - but they do the job and have a perfect retro arcade look. Visually they look great and they seem durable. The mounting tabs for the microswitch have little nubs that perfectly snap into holes in the body of the microswitch.The long shafts on these buttons make them look as though they can be used in a thick control panel, such as you might build with 3/4" particle board or melamine in the style of an old arcade machine. Take note though, you will not be able to simply shove the buttons through a 1" hole in your material. For one thing the button shafts stick out slightly beyond the 1" diameter of the threaded shaft. So you can't just push them straight through. You have to kind of scoop the mounting tabs through the hole and then shove the rest in. But this doesn't work if the panel is 3/4" thick. There just isn't enough room.Perhaps a 1-1/8" hole would work, I don't know. Since I didn't have one I used my router to create a recess in the underside of my cover panel, so it's only 1/4" thick where the buttons are. This worked but was kind of a pain. The ideal thing would probably be to have a 1/4" thick panel.

They work and they work well. Sure they don't appear be the highest quality, but I think they will hold up just fine long term. My daughter loves purple and this was perfect for the project I built her. Two things. I wish that the switches on the end were small enough to fit through the holes with the button. The switches unclip, so they can be clipped into place after drilling and placing the button, but not ideal. I also wish the rings you turn to tighten them down were larger so that there was more surface area to keep the button tight and so it could be tightened down more securely. To be clear. They work just fine. These are minor things considering the price.

Buttons work like they should. Only issue some of the holes on the micro switches were not properly drilled so I had to take a exacto knife and make the holes larger to fit the pegs on the buttons. Also I feel the micro switches take to much pressure to activate they should use micro switches with a lighter touch to activate.